{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
High-precision countersink 90° 7 mm
Article no.: 150152 7
Article code:
Click to enlarge image
Click to enlarge image
Three-flute countersinks for accurate centring.
Click to enlarge image
Click to enlarge image
- Countersink tip angle: 90
- Tool material: HSS
- Number of cutting edges Z: 3
- Norm: DIN 335 C
- Shank: Shank with h9 and three drive flats
Product details
Technical Data
| External ⌀ | 7 mm | |
| Coating | uncoated | |
| Countersink tip angle | 90 degrees | |
| Tool material | HSS | |
| Number of cutting edges Z | 3 | |
| Norm | DIN 335 C | |
| Shank | Shank with h9 and three drive flats | |
| Through-coolant | no | |
| smallest countersink ⌀ for holes from | 1.8 mm | |
| Overall length L | 50 mm | |
| Shank ⌀ Ds | 6 mm | |
| for countersunk screws ISO 2009, 2010, 7046, 7047 | M3.5 | |
| Feed f in steel < 500 N/mm2 | 0.09 mm/rev. | |
| Shank tolerance | h9 | |
| Colour ring | without | |
| Type of product | Stepped drill and countersink |
Identification numbers & Classifications
| Article number | 150152 7 | |
| EAN / GTIN | 4045197716927 | |
| Manufacturer number | 150152 7 |
Application Table
N
70
N
33
P
28
P
27
P
27
Description
Version:
All countersinks have 3 cutting edges, radially relieved.
Flutes are ground from solid.
High-precision countersink, produced with tight manufacturing tolerances similar to DIN 335-C.
Three drive flats on the shank for use in a 3-jaw chuck.
Flutes are ground from solid.
High-precision countersink, produced with tight manufacturing tolerances similar to DIN 335-C.
Three drive flats on the shank for use in a 3-jaw chuck.
Application:
High precision countersinks for chatter-free countersinking.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
|
High-precision countersink 90° 7 mm |
||||||
| Number of cutting edges Z | 3 | 3 | 3 | 3 | 3 | 3 |
| Overall length L | 50 | 50 | 50 | 50 | 50 | 50 |
| Norm | DIN 335 C | DIN 335 C | DIN 335 C | DIN 335 C | DIN 335 C | DIN 335 C |
| Shank | Shank with h9 and three drive flats | Plain shank with h9 | Plain shank with h9 | Plain shank with h9 | Plain shank with h9 | Plain shank with h9 |
| Tool material | HSS | HSS | HSS | HSS | HSS E | HSS E |
| smallest countersink ⌀ for holes from | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 |
| Type of product | Stepped drill and countersink | Stepped drill and countersink | Stepped drill and countersink | Stepped drill and countersink | Stepped drill and countersink | Stepped drill and countersink |