{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Jobber drill HSS-E for Hardox H 22 mm
Article no.: 116380 22
Article code:
- Tool material: HSS Co 8
- Standard: Manufacturer’s standard
- Type: H
- Tolerance nominal ⌀: h8
- Point angle: 130
Product details
Technical Data
| Nominal ⌀ DC | 22 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Standard | Manufacturer’s standard | |
| Type | H | |
| Tolerance nominal ⌀ | h8 | |
| Point angle | 130 degrees | |
| Helix angle | 8-15 degrees | |
| Shank | Morse taper | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| recommended maximum drilling depth L2 | 57 mm | |
| Flute length Lc | 90 mm | |
| Overall length L | 211 mm | |
| Morse taper MT size | 3 | |
| Feed f in steel < 1400 N/mm2 | 0.14 mm/rev. | |
| Colour ring | without | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 116380 22 | |
| EAN / GTIN | 4045197032652 | |
| Manufacturer number | 116380 22 |
Application Table
P
10
P
8
H
5
S
5
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Jobber drill HSS-E for Hardox H 22 mm |
||||||
| Number of cutting edges Z | 2 | 2 | 2 | 2 | 2 | 3 |
| Colour ring | without | without | without | without | without | without |
| Through-coolant | no | no | no | no | no | no |
| Standard | Manufacturer’s standard | DIN 345 | DIN 345 | DIN 345 | DIN 341 | DIN 343 |
| Shank | Morse taper | Morse taper | Morse taper | Morse taper | Morse taper | Morse taper |
| Morse taper MT size | 3 | 2 | 2 | 2 | 2 | 2 |
| Type of product | Jobber drill | Jobber drill | Jobber drill | Jobber drill | Jobber drill | Jobber drill |