{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Jobber drill HSS-E VA, uncoated, ⌀ DC h8: 30mm
Article no.: 116360 30
Article code:
- Tool material: HSS E
- Standard: DIN 345
- Type: INOX
- Tolerance nominal ⌀: h8
- Point angle: 135
Product details
Technical Data
| Nominal ⌀ DC | 30 mm | |
| Coating | uncoated | |
| Tool material | HSS E | |
| Standard | DIN 345 | |
| Type | INOX | |
| Tolerance nominal ⌀ | h8 | |
| Point angle | 135 degrees | |
| Helix angle | 35-40 degrees | |
| Shank | Morse taper | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| recommended maximum drilling depth L2 | 130 mm | |
| Flute length Lc | 175 mm | |
| Overall length L | 296 mm | |
| Morse taper MT size | 3 | |
| Feed f in steel < 750 N/mm2 | 0.25 mm/rev. | |
| Colour ring | without | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 116360 30 | |
| EAN / GTIN | 4045197032317 | |
| Manufacturer number | 116360 30 |
Application Table
P
40
P
30
P
25
P
10
M
12
S
5
K
25
N
80
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Jobber drill HSS-E VA, uncoated, ⌀ DC h8: 30mm |
||||||
| Through-coolant | no | no | no | no | no | no |
| Point angle | 135 degrees | 118 degrees | 118 degrees | 130 degrees | 118 degrees | 120 degrees |
| Tolerance nominal ⌀ | h8 | h8 | h8 | h8 | h8 | h8 |
| Type | INOX | N | N | H | N | N |
| Flute length Lc | 175 mm | 175 mm | 175 mm | 112 mm | 230 mm | 175 mm |
| recommended maximum drilling depth L2 | 130 mm | 130 mm | 130 mm | 67 mm | 185 mm | 130 mm |
| Type of product | Jobber drill | Jobber drill | Jobber drill | Jobber drill | Jobber drill | Jobber drill |