{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Drill range | 1 mm - 10.5 mm | |
Coating | uncoated | |
Tool material | HSS E | |
Standard | DIN 1897 | |
Type | N | |
Tolerance nominal ⌀ | h8 | |
Point angle | 130 degrees | |
Shank | Plain shank | |
Number of cutting edges Z | 2 | |
Through-coolant | no | |
Number of drills | 24 | |
Tapping hole ⌀ | 3.3 mm; 4.2 mm; 6.8 mm; 10.2 mm | |
Incremental steps of drills | 0.5 mm | |
with case | no | |
Colour ring | without | |
Type of product | Jobber drill |
Article number | 113730 1-10,5 | |
EAN / GTIN | 4062406264543 | |
Manufacturer number | 113730 1-10,5 |
This article |
Recommendations |
|||||
---|---|---|---|---|---|---|
Stub drill set HSS-E No. 113150, type N as a refill set, without case, uncoated, Type: 1-10,5 |
||||||
Number of drills | 24 | 24 | 24 | 24 | 24 | 25 |
Number of cutting edges Z | 2 | 2 | 2 | 2 | 2 | 2 |
Incremental steps of drills | 0.5 mm | 0.5 mm | 0.5 mm | 0.5 mm | 0.5 mm | 0.5 mm |
Colour ring | without | without | without | red | red | without |
Tapping hole ⌀ | 3.3 mm; 4.2 mm; 6.8 mm; 10.2 mm | 3.3; 4.2; 6.8; 10.2 mm | 3.3; 4.2; 6.8; 10.2 mm | 3.3; 4.2; 6.8; 10.2 mm | 3.3; 4.2; 6.8; 10.2 mm | 1.6 mm; 3.3 mm; 4.2 mm; 6.8 mm; 10.2 mm |
Standard | DIN 1897 | DIN 338 | DIN 338 | DIN 338 | DIN 338 | DIN 338 |
Point angle | 130 degrees | 118 degrees | 118 degrees | 130 degrees | 130 degrees | 130 degrees |