{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
WN.G 080408 CA6525
Article no.: 252114 CA6525
Article code:
Product details
Technical Data
| ISO code indexable insert | WNMG 080408 | |
| Corner radius | 0.8 mm | |
| Grade | CA6525 | |
| Tool material | Carbide | |
| Main application | M | |
| Cutting conditions | slightly interrupted | |
| Chip breaker | MS (brass) | |
| Tolerance | M | |
| Cutting depth ap | 0.8 mm - 4 mm | |
| Feed f | 0.1 mm/rev. - 0.35 mm/rev. | |
| Cutting speed vc main application | 60 m/min - 220 m/min | |
| Number of changes/inserts | 6 | |
| Finishing/roughing assignment | Semi-roughing | |
| Type of product | Indexable insert for turning |
Identification numbers & Classifications
| Article number | 252114 CA6525 | |
| EAN / GTIN | 4960664472338 | |
| Manufacturer number | TJV08632 |
Application Table
M
M
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
WN.G 080408 CA6525
on request
In stock
279 pieces in stock
12,97 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Subsequent delivery
0 pieces in stock
7,90 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1,261 pieces in stock
from
1
Pieces
12,66 €
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
10,55 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| ISO code indexable insert | WNMG 080408 | WNMG 080408 | WNMG 080408 |
| Finishing/roughing assignment | Semi-roughing | Skrubbearbejdning-sletbearbejdning | Finishing |
| Cutting conditions | slightly interrupted | slightly interrupted | slightly interrupted |
| Grade | CA6525 | HBT130 | HB7130-2 |
| Feed f | 0.1 mm/rev. - 0.35 mm/rev. | 0.12 mm/rev. - 0.45 mm/rev. | 0.1 mm/rev. - 0.5 mm/rev. |
| Main application | M | M | M |
| Type of product | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning |