{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Product details
Technical Data
| ISO code indexable insert | WNMG 080408 | |
| Corner radius | 0.8 mm | |
| Grade | CA315 | |
| Tool material | Carbide | |
| Main application | O | |
| Cutting conditions | slightly interrupted | |
| Chip breaker | KG | |
| Tolerance | M | |
| Cutting depth ap | 0.5 mm - 4 mm | |
| Feed f | 0.15 mm/rev. - 0.5 mm/rev. | |
| Cutting speed vc main application | 150 m/min - 350 m/min | |
| Coating | coated | |
| Number of changes/inserts | 6 | |
| Finishing/roughing assignment | Finishing | |
| Type of product | Indexable insert for turning |
Identification numbers & Classifications
| Article number | 252114 CA315 | |
| EAN / GTIN | 4960664800186 |
Application Table
K
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
WN.G 080408 CA315
on request
In stock
48 pieces in stock
from
1
Pieces
15,56 €
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
12,97 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
169 pieces in stock
from
1
Pieces
11,94 €
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
9,95 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
123 pieces in stock
from
1
Pieces
12,66 €
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
10,55 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
90 pieces in stock
from
1
Pieces
12,66 €
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
10,55 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | coated | TiCN | TiCN | TiCN |
| ISO code indexable insert | WNMG 080408 | WNMG 060408 | WNMG 080408 | WNMA 080408 |
| Finishing/roughing assignment | Finishing | Skrubbearbejdning-sletbearbejdning | Skrubbearbejdning-sletbearbejdning | Skrubbearbejdning-sletbearbejdning |
| Cutting depth ap | 0.5 mm - 4 mm | 0.4 mm - 6.5 mm | 0.4 mm - 6.5 mm | 0.4 mm - 6.5 mm |
| Main application | O | K | K | K |
| Type of product | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning |
| Tolerance | M | M | M | M |