{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Indexable milling cutter 90° MECX 32/8 mm
Article no.: 227100 32/8
Article code:
- Setting angle κ: 90
- Milling application: Circular milling; Ramping; End milling
- Through-coolant: yes
Product details
Technical Data
| Cutting edge ⌀ DC | 32 mm | |
| Number of cutting edges Z | 8 | |
| Shank type | Plain shank | |
| Setting angle κ | 90 degrees | |
| Milling application | Circular milling; Ramping; End milling | |
| Through-coolant | yes | |
| maximum cutting depth ap max | 6 mm | |
| Overhang L1 | 30 mm | |
| Overall length Ltot | 130 mm | |
| Shank ⌀ Ds h6 | 32 mm | |
| ⌀ D3 | 29 mm | |
| Circular interpolation milling ⌀ Dmin | 61 mm | |
| Circular interpolation milling ⌀ Dmax | 62 mm | |
| Ramping angle αmax | 0.41 degrees | |
| Ramping length L for αmax | 28 mm | |
| suitable indexable insert | BD.. 0703 | |
| Insert screw | 229707 (T6; 0.45 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 227100 32/8 | |
| EAN / GTIN | 4960664462919 | |
| Manufacturer number | THN03666 |
Description
Description:
Very close spacing provides improved productivity even under more unstable machining conditions. Low cutting forces and high stability for low tendency to vibrate. Permits various milling tasks such as milling shoulders and ramps etc.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Indexable milling cutter 90° MECX 32/8 mm
on request
In stock
2 pieces in stock
€490.53
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
9 pieces in stock
€454.00
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 8 | 8 |
| Milling application | Circular milling ;Ramping ;End milling | Circular milling ;Ramping ;End milling |
| suitable indexable insert | BD.. 0703 | AP.. 0602.. |
| Shank type | Plain shank | Plain shank |
| Cutting edge ⌀ DC | 32 | 32 |
| Circular interpolation milling ⌀ Dmin | 61 | 62 |
| Ramping length L for αmax | 28 | 28.85 |