{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Indexable milling cutter 90° MECX 12/2 mm
Article no.: 227100 12/2
Article code:
- Setting angle κ: 90
- Milling application: Circular milling; Ramping; End milling
- Through-coolant: yes
Product details
Technical Data
| Cutting edge ⌀ DC | 12 mm | |
| Number of cutting edges Z | 2 | |
| Shank type | Plain shank | |
| Setting angle κ | 90 degrees | |
| Milling application | Circular milling; Ramping; End milling | |
| Through-coolant | yes | |
| maximum cutting depth ap max | 6 mm | |
| Overhang L1 | 18 mm | |
| Overall length Ltot | 80 mm | |
| Shank ⌀ Ds h6 | 12 mm | |
| ⌀ D3 | 9 mm | |
| Circular interpolation milling ⌀ Dmin | 21 mm | |
| Circular interpolation milling ⌀ Dmax | 22 mm | |
| Ramping angle αmax | 1.43 degrees | |
| Ramping length L for αmax | 8 mm | |
| suitable indexable insert | BD.. 0703 | |
| Insert screw | 229706 (T6; 0.45 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 227100 12/2 | |
| EAN / GTIN | 4960664462742 | |
| Manufacturer number | THN03606 |
Description
Description:
Very close spacing provides improved productivity even under more unstable machining conditions. Low cutting forces and high stability for low tendency to vibrate. Permits various milling tasks such as milling shoulders and ramps etc.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Indexable milling cutter 90° MECX 12/2 mm
on request
In stock
2 pieces in stock
€205.02
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
34 pieces in stock
€281.00
plus VAT at the current rate
Prices plus delivery costs
|
|
| Through-coolant | yes | yes |
| suitable indexable insert | BD.. 0703 | AP.. 0602.. |
| Shank type | Plain shank | Plain shank |
| Setting angle κ | 90 | 90 |
| Circular interpolation milling ⌀ Dmin | 21 | 22 |
| Circular interpolation milling ⌀ Dmax | 22 | 22 |
| Type of product | End / face mill | End / face mill |