{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 3 mm | |
Coating | TiAlN | |
Tool material | Solid carbide | |
Norm | DIN 6527 | |
Type | W | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 4 | |
Helix angle | 45 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.25×D for side milling | |
Shank | DIN 6535 HA to h6 | |
Through-coolant | no | |
Flute length Lc | 10 mm | |
Overall length L | 57 mm | |
Shank ⌀ Ds | 6 mm | |
Corner chamfer angle | 90 degrees | |
Feed fz for slot milling in short-chipping aluminium | 0.008 mm | |
Feed fz for side milling in short-chipping aluminium | 0.01 mm | |
Colour ring | yellow | |
Type of product | End / face mill |
Article number | 202545 3 | |
EAN / GTIN | 4045197117304 | |
Manufacturer number | 202545 3 |
This article |
Recommendations |
||||
---|---|---|---|---|---|
Solid carbide milling cutter 3 mm
on request
In stock
214 pieces in stock
31,80 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
128 pieces in stock
37,20 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Subsequent delivery
0 pieces in stock
54,20 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
480 pieces in stock
55,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
25 pieces in stock
44,20 €
plus VAT at the current rate
Prices plus delivery costs
|
|
Cutting width ae for milling operation | Full slot cutting depth 1×D ;0.25×D for side milling | Full slot cutting depth 1×D ;0.5×D for side milling | Full slot cutting depth 1×D ;0.25×D for side milling | Full slot cutting depth 1×D ;0.25×D for side milling | Full slot cutting depth 1×D ;Full slot cutting depth 1×D |
Norm | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 |
Cutting edge ⌀ DC | 3 | 3 | 3 | 3 | 3 |
Tool material | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
Tolerance nominal ⌀ | e8 | h6 | e8 | h6 | h6 |
Feed fz for slot milling in short-chipping aluminium | 0.008 | 0.008 | 0.008 | 0.04 | 0.04 |
Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |