{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 12 mm | |
Coating | TiAlN | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Type | W | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 4 | |
Helix angle | 45 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.25×D for side milling | |
Shank | DIN 6535 HA to h6 | |
Through-coolant | no | |
Flute length Lc | 28 mm | |
Overall length L | 83 mm | |
Shank ⌀ Ds | 12 mm | |
Corner chamfer angle | 90 degrees | |
Feed fz for slot milling in short-chipping aluminium | 0.05 mm | |
Feed fz for side milling in short-chipping aluminium | 0.09 mm | |
Colour ring | yellow | |
Type of product | End / face mill |
Article number | 202545 12 | |
EAN / GTIN | 4045197117366 | |
Manufacturer number | 202545 12 |
This article |
Recommendations |
|||||||
---|---|---|---|---|---|---|---|---|
Solid carbide milling cutter, TiAlN, ⌀ DC: 12mm
on request
In stock
240 pieces in stock
77,80 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
56 pieces in stock
95,40 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
40 pieces in stock
144,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
30 pieces in stock
146,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
233 pieces in stock
75,20 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
234 pieces in stock
43,50 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
123 pieces in stock
139,50 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
79 pieces in stock
84,00 €
plus VAT at the current rate
Prices plus delivery costs
|
|
Coating | TiAlN | uncoated | DLC | DLC | AlCrN | uncoated | DLC | uncoated |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.25×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.25×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.25×D for side milling | Full slot cutting depth 1×D; Full slot cutting depth 1×D |
Through-coolant | no | no | no | no | no | no | no | no |
Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HB to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
Flute length Lc | 28 mm | 28 mm | 28 mm | 28 mm | 26 mm | 26 mm | 28 mm | 28 mm |
Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |