{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 8 mm | |
Coating | DLC | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Type | W | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 4 | |
Helix angle | 45 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.25×D for side milling | |
Shank | DIN 6535 HA to h6 | |
Through-coolant | no | |
Flute length Lc | 22 mm | |
Overall length L | 63 mm | |
Shank ⌀ Ds | 8 mm | |
Corner chamfer angle | 90 degrees | |
Feed fz for slot milling in short-chipping aluminium | 0.03 mm | |
Feed fz for side milling in short-chipping aluminium | 0.05 mm | |
Colour ring | yellow | |
Type of product | End / face mill |
Article number | 202515 8 | |
EAN / GTIN | 4045197588531 | |
Manufacturer number | 202515 8 |
This article |
Recommendations |
|||||||
---|---|---|---|---|---|---|---|---|
Solid carbide milling cutter, DLC, ⌀ DC: 8mm
on request
In stock
125 pieces in stock
€71.40
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
158 pieces in stock
€39.50
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
394 pieces in stock
€39.80
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
72 pieces in stock
€80.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
438 pieces in stock
€37.60
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
191 pieces in stock
€21.80
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
190 pieces in stock
€72.20
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
107 pieces in stock
€48.50
plus VAT at the current rate
Prices plus delivery costs
|
|
Corner chamfer angle | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.25×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.25×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.25×D for side milling | Full slot cutting depth 1×D; Full slot cutting depth 1×D |
Colour ring | yellow | yellow | yellow | yellow | without | without | yellow | yellow |
Standard | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 |
Helix angle | 45 degrees | 38 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 38 degrees | 38 degrees |
No. of teeth Z | 4 | 4 | 4 | 2 | 3 | 3 | 4 | 4 |
Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |