{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 16 mm | |
Coating | DLC | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Type | W | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 4 | |
Helix angle | 45 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.25×D for side milling | |
Shank | DIN 6535 HA to h6 | |
Through-coolant | no | |
Flute length Lc | 48 mm | |
Overall length L | 110 mm | |
Shank ⌀ Ds | 16 mm | |
Corner chamfer angle | 90 degrees | |
Feed fz for slot milling in short-chipping aluminium | 0.065 mm | |
Feed fz for side milling in short-chipping aluminium | 0.12 mm | |
Colour ring | yellow | |
Type of product | End / face mill |
Article number | 202515 16M | |
EAN / GTIN | 4045197693105 | |
Manufacturer number | 202515 16M |
This article |
Recommendations |
|||||||
---|---|---|---|---|---|---|---|---|
Solid carbide milling cutter, DLC, ⌀ DC: 16Mmm
on request
In stock
47 pieces in stock
€275.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
59 pieces in stock
€198.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
65 pieces in stock
€198.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
140 pieces in stock
€235.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
166 pieces in stock
€235.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
196 pieces in stock
€129.50
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
73 pieces in stock
€264.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
34 pieces in stock
€209.00
plus VAT at the current rate
Prices plus delivery costs
|
|
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.25×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.25×D for side milling | Full slot cutting depth 1×D; Full slot cutting depth 1×D |
Colour ring | yellow | yellow | yellow | yellow | yellow | yellow | yellow | yellow |
Shank | DIN 6535 HA to h6 | DIN 6535 HB to h6 | DIN 6535 HB to h6 | DIN 6535 HB to h6 | DIN 6535 HB to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
Cutting edge ⌀ DC | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm |
Feed fz for side milling in short-chipping aluminium | 0.12 mm | 0.09 mm | 0.09 mm | 0.09 mm | 0.09 mm | 0.09 mm | 0.18 mm | 0.14 mm |
Feed fz for slot milling in short-chipping aluminium | 0.065 mm | 0.065 mm | 0.065 mm | 0.065 mm | 0.065 mm | 0.065 mm | 0.14 mm | 0.12 mm |
No. of teeth Z | 4 | 3 | 3 | 3 | 3 | 3 | 4 | 3 |