{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 6 mm | |
Coating | uncoated | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Type | W | |
Tolerance nominal ⌀ | h6 | |
No. of teeth Z | 4 | |
Helix angle | 38 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
Shank | DIN 6535 HA to h6 | |
Through-coolant | no | |
Flute length Lc | 16 mm | |
Overhang length L1 incl. recess | 21 mm | |
Recess ⌀ D1 | 5.8 mm | |
Overall length L | 57 mm | |
Shank ⌀ Ds | 6 mm | |
Corner chamfer angle | 90 degrees | |
Feed fz for slot milling in short-chipping aluminium | 0.025 mm | |
Feed fz for side milling in short-chipping aluminium | 0.03 mm | |
Colour ring | yellow | |
Type of product | End / face mill |
Article number | 202480 6 | |
EAN / GTIN | 4045197117113 | |
Manufacturer number | 202480 6 |
This article |
Recommendations |
|||||||
---|---|---|---|---|---|---|---|---|
Solid carbide milling cutter DIN 6535 HA, uncoated, ⌀ DC: 6mm
on request
In stock
124 pieces in stock
€37.20
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
181 pieces in stock
€54.20
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
182 pieces in stock
€31.80
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
52 pieces in stock
€68.20
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
315 pieces in stock
€27.30
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
392 pieces in stock
€15.80
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
165 pieces in stock
€55.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
68 pieces in stock
€44.20
plus VAT at the current rate
Prices plus delivery costs
|
|
Coating | uncoated | DLC | TiAlN | DLC | AlCrN | uncoated | DLC | uncoated |
Colour ring | yellow | yellow | yellow | yellow | without | without | yellow | yellow |
Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HB to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
Tolerance nominal ⌀ | h6 | e8 | e8 | e8 | e8 | e8 | h6 | h6 |
No. of teeth Z | 4 | 4 | 4 | 2 | 3 | 3 | 4 | 4 |
Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |