{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter DIN 6535 HA 5 mm
Article no.: 202480 5
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: W
- Tolerance nominal ⌀: h6
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 5 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | W | |
| Tolerance nominal ⌀ | h6 | |
| No. of teeth Z | 4 | |
| Helix angle | 38 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 15 mm | |
| Overhang length L1 incl. recess | 20 mm | |
| Recess ⌀ D1 | 4.8 mm | |
| Overall length L | 57 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0.015 mm | |
| Feed fz for side milling in short-chipping aluminium | 0.02 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202480 5 | |
| EAN / GTIN | 4045197117106 | |
| Manufacturer number | 202480 5 |
Application Table
N
180
N
140
N
105
N
180
N
130
N
150
N
130
N
110
N
180
N
140
N
180
Description
Version:
Extra sharp cutting edges.
Dimensions similar to DIN 6527.
Double relief ground side clearance angle.
Dimensions similar to DIN 6527.
Double relief ground side clearance angle.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Solid carbide milling cutter DIN 6535 HA 5 mm
on request
In stock
103 pieces in stock
€37.20
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
100 pieces in stock
€54.20
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
177 pieces in stock
€31.80
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
175 pieces in stock
€55.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
37 pieces in stock
€44.20
plus VAT at the current rate
Prices plus delivery costs
|
|
| Corner chamfer angle | 90 | 90 | 90 | 90 | 90 |
| Overall length L | 57 | 57 | 57 | 57 | 57 |
| Through-coolant | no | no | no | no | no |
| Cutting edge ⌀ DC | 5 | 5 | 5 | 5 | 5 |
| Tool material | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Shank ⌀ Ds | 6 | 6 | 6 | 6 | 6 |