{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 4 mm | |
Coating | TiAlN | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Type | N | |
Tolerance nominal ⌀ | h10 | |
No. of teeth Z | 2 | |
Helix angle | 45 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
Shank | DIN 6535 HA to h6 | |
Through-coolant | no | |
Flute length Lc | 11 mm | |
Overall length L | 57 mm | |
Shank ⌀ Ds | 6 mm | |
Corner chamfer width at 45° | 0.1 mm | |
Corner chamfer angle | 45 degrees | |
Feed fz for slot milling in steel < 750 N/mm2 | 0.02 mm | |
Feed fz for side milling in steel < 750 N/mm2 | 0.023 mm | |
Colour ring | green | |
Type of product | End / face mill |
Article number | 201650 4 | |
EAN / GTIN | 4045197113573 | |
Manufacturer number | 201650 4 |
This article |
Recommendations |
|||||
---|---|---|---|---|---|---|
Solid carbide slot drill, TiAlN, ⌀ DC: 4mm
on request
In stock
137 pieces in stock
€17.40
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
82 pieces in stock
€41.90
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
186 pieces in stock
€17.10
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
112 pieces in stock
€58.20
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
12 pieces in stock
€41.10
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
34 pieces in stock
€42.90
plus VAT at the current rate
Prices plus delivery costs
|
|
Coating | TiAlN | DLC | uncoated | ZOX | TiAlN | TiAlN |
Corner chamfer angle | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | 0.5×D for side milling; Full slot cutting depth 1×D | Full slot cutting depth 1×D; Full slot cutting depth 1×D | Full slot cutting depth 1×D; 0.5×D for side milling |
Overall length L | 57 mm | 54 mm | 54 mm | 57 mm | 57 mm | 57 mm |
Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HB to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
Tool material | Solid carbide | Solid carbide | Solid carbide | Solid carbide | solid carbide | Solid carbide |
Shank ⌀ Ds | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm |