{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 4 mm | |
Coating | uncoated | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Type | W | |
Tolerance nominal ⌀ | h10 | |
No. of teeth Z | 2 | |
Helix angle | 45 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
Shank | DIN 6535 HB to h6 | |
Through-coolant | no | |
Flute length Lc | 8 mm | |
Overall length L | 54 mm | |
Shank ⌀ Ds | 6 mm | |
Corner chamfer width at 45° | 0.1 mm | |
Corner chamfer angle | 45 degrees | |
Feed fz for slot milling in short-chipping aluminium | 0.015 mm | |
Feed fz for side milling in short-chipping aluminium | 0.02 mm | |
Colour ring | yellow | |
Type of product | End / face mill |
Article number | 201200 4 | |
EAN / GTIN | 4045197112224 | |
Manufacturer number | 201200 4 |
This article |
Recommendations |
|||||
---|---|---|---|---|---|---|
Solid carbide slot drill DIN 6535 HB, uncoated, ⌀ DC: 4mm
on request
In stock
193 pieces in stock
€17.10
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
97 pieces in stock
€41.90
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
138 pieces in stock
€17.40
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
119 pieces in stock
€58.20
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
12 pieces in stock
€41.10
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
35 pieces in stock
€42.90
plus VAT at the current rate
Prices plus delivery costs
|
|
Coating | uncoated | DLC | TiAlN | ZOX | TiAlN | TiAlN |
Corner chamfer angle | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | 0.5×D for side milling; Full slot cutting depth 1×D | Full slot cutting depth 1×D; Full slot cutting depth 1×D | Full slot cutting depth 1×D; 0.5×D for side milling |
Overall length L | 54 mm | 54 mm | 57 mm | 57 mm | 57 mm | 57 mm |
Shank | DIN 6535 HB to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
Tool material | Solid carbide | Solid carbide | Solid carbide | Solid carbide | solid carbide | Solid carbide |
Shank ⌀ Ds | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm |