Mini milling cutter HSS-Co8, uncoated, ⌀ e8 DC: 5,5mm

Article no.: 191400 5,5
plus VAT at the current rate Prices plus delivery costs
on request
In stock
18 pieces in stock

Select article variation and quantity

⌀ e8 DC (mm) Unit price incl. VAT
  • Tool material: HSS Co 8
  • Standard: Manufacturer’s standard
  • Type: N
  • Tolerance nominal ⌀: e8
  • No. of teeth Z: 3

Add to wishlist

Share this product

or copy this link

Product details

Technical Data

Cutting edge ⌀ DC 5.5 mm
Coating uncoated
Tool material HSS Co 8
Standard Manufacturer’s standard
Type N
Tolerance nominal ⌀ e8
No. of teeth Z 3
Helix angle 30 degrees
Direction of infeed horizontal, oblique and vertical
Shank HB with h6
Through-coolant no
Flute length Lc 13 mm
Overall length L 44 mm
Shank ⌀ Ds 6 mm
Corner chamfer angle 90 degrees
Feed fz for slot milling in steel < 750 N/mm2 0.008 mm
Colour ring without
Type of product End / face mill

Identification numbers & Classifications

Article number 191400 5,5
EAN / GTIN 4045197102522
Manufacturer number 191400 5,5

Application Table

Aluminium (short chipping)
N
83
Steel < 500 N/mm²
P
30
Steel < 750 N/mm²
P
25
Steel < 900 N/mm²
P
25
CuZn
N
55
wet maximum
 

Description

Version:

Centre cutting teeth for plunging.
Eccentric relief ground. General-purpose cutting edge geometry. Shank similar to DIN 1835 B with shank tolerance h6. For use as slot drill or end mill in side lock arbors and collet chucks. High cutting performance, very competitive price. For milling keyways.

Note:

Save the regrinding costs: it is cheaper to use a mini slot drill to the limit of wear and throw it away, than to regrind it.

Downloads & documents

Compare with similar products

This article


Recommendations


Mini milling cutter HSS-Co8, uncoated, ⌀ e8 D<sub>C</sub>: 5,5mm

Mini milling cutter HSS-Co8, uncoated, ⌀ e8 DC: 5,5mm

on request
In stock
18 pieces in stock
€9.25
plus VAT at the current rate Prices plus delivery costs
on request
In stock
158 pieces in stock
€14.10
plus VAT at the current rate Prices plus delivery costs
on request
In stock
52 pieces in stock
€28.00
plus VAT at the current rate Prices plus delivery costs
on request
In stock
212 pieces in stock
€17.40
plus VAT at the current rate Prices plus delivery costs
on request
In stock
85 pieces in stock
€22.20
plus VAT at the current rate Prices plus delivery costs
on request
In stock
2 pieces in stock
€8.10
plus VAT at the current rate Prices plus delivery costs
on request
In stock
83 pieces in stock
€18.65
plus VAT at the current rate Prices plus delivery costs
on request
In stock
88 pieces in stock
€21.40
plus VAT at the current rate Prices plus delivery costs
on request
Subsequent delivery
0 pieces in stock
€12.45
plus VAT at the current rate Prices plus delivery costs
Coating uncoated uncoated TiAlN TiAlN uncoated uncoated TiAlN TiAlN uncoated
Through-coolant no no no no no no no no no
Cutting edge ⌀ DC 5.5 mm 5.5 mm 5.5 mm 5.5 mm 5.5 mm 5.5 mm 5.5 mm 5.5 mm 5.5 mm
Helix angle 30 degrees 30 degrees 30 degrees 30 degrees 30 degrees 30 degrees 30 degrees 30 degrees 30-40 degrees
Feed fz for slot milling in steel < 750 N/mm2 0.008 mm 0.008 mm 0.008 mm 0.008 mm 0.008 mm 0.008 mm 0.008 mm 0.008 mm 0.01 mm
No. of teeth Z 3 3 3 3 3 3 3 3 4
Direction of infeed horizontal, oblique and vertical horizontal, oblique and vertical horizontal, oblique and vertical horizontal, oblique and vertical horizontal, oblique and vertical horizontal, oblique and vertical horizontal, oblique and vertical horizontal, oblique and vertical horizontal, oblique and vertical

Services & product advisors

Direct purchase

Sign in to your Account

To shopping cart