{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 5.5 mm | |
Coating | uncoated | |
Tool material | HSS Co 8 | |
Standard | Manufacturer’s standard | |
Type | N | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 3 | |
Helix angle | 30 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Shank | HB with h6 | |
Through-coolant | no | |
Flute length Lc | 8 mm | |
Overall length L | 39 mm | |
Shank ⌀ Ds | 6 mm | |
Corner chamfer angle | 90 degrees | |
Feed fz for slot milling in steel < 750 N/mm2 | 0.008 mm | |
Colour ring | without | |
Type of product | End / face mill |
Article number | 191360 5,5 | |
EAN / GTIN | 4045197102102 | |
Manufacturer number | 191360 5,5 |
This article |
Recommendations |
||||||||
---|---|---|---|---|---|---|---|---|---|
Mini milling cutter HSS-Co8, uncoated, ⌀ e8 DC: 5,5mm
on request
In stock
2 pieces in stock
€8.10
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
155 pieces in stock
€14.10
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
52 pieces in stock
€28.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
204 pieces in stock
€17.40
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
82 pieces in stock
€22.20
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
75 pieces in stock
€18.65
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
17 pieces in stock
€9.25
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
86 pieces in stock
€21.40
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
54 pieces in stock
€12.45
plus VAT at the current rate
Prices plus delivery costs
|
|
Coating | uncoated | uncoated | TiAlN | TiAlN | uncoated | TiAlN | uncoated | TiAlN | uncoated |
Through-coolant | no | no | no | no | no | no | no | no | no |
Cutting edge ⌀ DC | 5.5 mm | 5.5 mm | 5.5 mm | 5.5 mm | 5.5 mm | 5.5 mm | 5.5 mm | 5.5 mm | 5.5 mm |
Helix angle | 30 degrees | 30 degrees | 30 degrees | 30 degrees | 30 degrees | 30 degrees | 30 degrees | 30 degrees | 30-40 degrees |
Feed fz for slot milling in steel < 750 N/mm2 | 0.008 mm | 0.008 mm | 0.008 mm | 0.008 mm | 0.008 mm | 0.008 mm | 0.008 mm | 0.008 mm | 0.01 mm |
No. of teeth Z | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 4 |
Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |