{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Machine reamer H7, uncoated, Nominal ⌀ DC: 9mm
Article no.: 164000 9
Article code:
- Tolerance: H7
- Tool material: HSS E
- Standard: DIN 208 B
- Helix angle: 7-8
- Through-coolant: no
Product details
Technical Data
| Nominal ⌀ DC | 9 mm | |
| Coating | uncoated | |
| Tolerance | H7 | |
| Tool material | HSS E | |
| Standard | DIN 208 B | |
| Helix angle | 7-8 degrees | |
| Through-coolant | no | |
| Shank | Morse taper | |
| Application for type of drilling | for through hole | |
| Flute length Lc | 36 mm | |
| Overhang L1 | 94 mm | |
| Overall length L | 162 mm | |
| Number of cutting edges Z | 6 | |
| Morse taper MT size | 1 | |
| Feed f in steel < 750 N/mm2 | 0.13 mm/rev. | |
| Reaming oversize in diameter | 0.1 mm - 0.2 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 164000 9 | |
| EAN / GTIN | 4045197091857 | |
| Manufacturer number | 164000 9 |
Application Table
N
20
N
20
P
15
P
10
P
7
P
5
P
4
M
5
M
5
S
5
K
5
N
13
Description
Version:
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Reamers finish ground for fit H7.
Reamers finish ground for fit H7.
Application:
For reaming through holes, as the chips are evacuated in the cutting direction. Also suitable for blind holes due to the short chamfer lead.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Machine reamer H7, uncoated, Nominal ⌀ DC: 9mm
on request
In stock
25 pieces in stock
€ 64,20
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
184 pieces in stock
€ 28,50
plus VAT at the current rate
Prices plus delivery costs
|
on request
Unknown
0 pieces in stock
€ 66,40
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
52 pieces in stock
€ 56,80
plus VAT at the current rate
Prices plus delivery costs
|
on request
Unknown
0 pieces in stock
€ 88,80
plus VAT at the current rate
Prices plus delivery costs
|
on request
Unknown
0 pieces in stock
€ 101,00
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overhang L1 | 94 mm | 83 mm | 84 mm | 84 mm | 81 mm | 94 mm |
| Coating | uncoated | uncoated | uncoated | uncoated | TiN | uncoated |
| Colour ring | without | green | without | without | without | without |
| Nominal ⌀ DC | 9 mm | 9 mm | 9 mm | 9 mm | 9 mm | 9 mm |
| Flute length Lc | 36 mm | 36 mm | 36 mm | 36 mm | 36 mm | 36 mm |
| Application for type of drilling | for through hole | for through holes | for through holes | for through holes | for through holes | for through hole |
| Feed f in steel < 750 N/mm2 | 0.13 mm/rev. | 0.25 mm/rev. | 0.25 mm/rev. | 0.25 mm/rev. | 0.2 mm/rev. | 0.13 mm/rev. |