{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Machine reamer H7, uncoated, Nominal ⌀ DC: 18mm
Article no.: 164000 18
Article code:
- Tolerance: H7
- Tool material: HSS E
- Standard: DIN 208 B
- Helix angle: 7-8
- Through-coolant: no
Product details
Technical Data
| Nominal ⌀ DC | 18 mm | |
| Coating | uncoated | |
| Tolerance | H7 | |
| Tool material | HSS E | |
| Standard | DIN 208 B | |
| Helix angle | 7-8 degrees | |
| Through-coolant | no | |
| Shank | Morse taper | |
| Application for type of drilling | for through hole | |
| Flute length Lc | 56 mm | |
| Overhang L1 | 137 mm | |
| Overall length L | 219 mm | |
| Number of cutting edges Z | 8 | |
| Morse taper MT size | 2 | |
| Feed f in steel < 750 N/mm2 | 0.2 mm/rev. | |
| Reaming oversize in diameter | 0.2 mm - 0.3 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 164000 18 | |
| EAN / GTIN | 4045197091949 | |
| Manufacturer number | 164000 18 |
Application Table
N
20
N
20
P
15
P
10
P
7
P
5
P
4
M
5
M
5
S
5
K
5
N
13
Description
Version:
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Reamers finish ground for fit H7.
Reamers finish ground for fit H7.
Application:
For reaming through holes, as the chips are evacuated in the cutting direction. Also suitable for blind holes due to the short chamfer lead.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Machine reamer H7, uncoated, Nominal ⌀ DC: 18mm
on request
In stock
16 pieces in stock
76,80 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
97 pieces in stock
56,80 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Unknown
0 pieces in stock
128,50 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
19 pieces in stock
127,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Unknown
0 pieces in stock
128,50 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 8 | 8 | 8 | 8 | 8 |
| Overhang L1 | 137 mm | 135 mm | 136 mm | 136 mm | 137 mm |
| Colour ring | without | green | without | without | without |
| Standard | DIN 208 B | Manufacturer’s standard | Manufacturer’s standard | DIN 212 B | DIN 208 B |
| Shank | Morse taper | DIN 1835 A to h6 | DIN 1835 A to h6 | Plain shank with h9 | Morse taper |
| Flute length Lc | 56 mm | 56 mm | 56 mm | 56 mm | 56 mm |
| Feed f in steel < 750 N/mm2 | 0.2 mm/rev. | 0.3 mm/rev. | 0.3 mm/rev. | 0.3 mm/rev. | 0.2 mm/rev. |