{{ name }}
Prekės Nr. {{ combinedCodeWithHighlight }}
Prekės numeris:
EAN / GTIN:
Gamintojo numeris:
Kietų keičiamų kumštelių komplektas 3 vnt., Tinka griebtuvams: 200
Prekės Nr.: 313210 200
Prekės numeris:
Produkto detalės
Techniniai duomenys
| for chuck type | 200 mm | |
| Length L | 71.7 mm | |
| Width B | 22 mm | |
| Slot width D | 10 mm | |
| Bore spacing b | 40 mm | |
| Tenon length A | 20 mm | |
| suitable for colour code | Röhm self-centring chucks and jaws; Schunk self-centring chucks and jaws | |
| Type of product | Self-centring chuck jaws |
Identifikavimo numeriai ir klasifikacijos
| Produkto numeris | 313210 200 | |
| EAN / GTIN | 2050001929051 | |
| Gamintojo numeris | 0155101 |
Aprašymas
Application:
As the jaws can be changed or adjusted to the required diameter in just a few seconds, it is useful to have several jaw sets on hand ready for use at the machine. This minimises set-up times. The jaw units consist for example of several sets of base jaws with soft top jaws, which can be machined out to the required diameters. This rationalisation method is not only necessary for NC machines but also important for every lathe type.
For fitting to hardened base jaws. Applicable as reversible jaws in conjunction with the base jaws.
For fitting to hardened base jaws. Applicable as reversible jaws in conjunction with the base jaws.
Suitable for:
Schunk self-centring chucks No. 313115; 313117; 313135; 313137, Röhm self-centring chucks Duro No. 313120; 313140 and other self-centring chuck systems.
Note:
- Hard top and stepped jaws purchased subsequently must be ground internally in the chuck for concentricity and run-out.
Atsisiuntimai ir dokumentai
Palyginti su panašiais produktais
Šis produktas |
Rekomendacijos |
|
|---|---|---|
Kietų keičiamų kumštelių komplektas 3 vnt., Tinka griebtuvams: 200
reikia užklausti
Yra sandėlyje
Available in 11-14 working days
3 vnt. yra sandėlyje
3 pieces available in 11-14 working days
|
||
| Bore spacing b | 40 mm | 40 mm |
| Width B | 22 mm | 22 mm |
| for chuck type | 200 mm | 200 mm |
| Length L | 71.7 mm | 105 mm |
| Slot width D | 10 mm | 10 mm |
| suitable for colour code | Röhm self-centring chucks and jaws; Schunk self-centring chucks and jaws | Röhm self-centring chucks and jaws; Schunk self-centring chucks and jaws |
| Type of product | Self-centring chuck jaws | Self-centring chuck jaws |