{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
- Pull stud standard: ISO 7388-3
Product details
Technical Data
| suitable for steep tapers | 40 | |
| Hole characteristics | with bore | |
| Pull stud standard | ISO 7388-3 | |
| Collar ⌀ D | 23 mm | |
| Head ⌀ D1 | 19 mm | |
| Overall length L | 54 mm | |
| L1 | 26 mm | |
| Thread M | M16 | |
| Angle A | 15 degrees | |
| maximum tightening torque | 50 Nm | |
| suitable for taper arbors with colour code | SK 40 | |
| Width across flats | 19 mm | |
| Type of product | Pull Stud |
Identification numbers & Classifications
| Article number | 308605 40 | |
| EAN / GTIN | 4045197554529 | |
| Manufacturer number | 308605 40 |
Description
Opis:
Držalo orodja se prek priteznega čepa vpenjalnega prijemala vretena pomakne v vreteno. Pritezni čepi so na voljo v različnih izvedbah. Predstavljajo pomemben vezni člen med strojem in orodjem. Zahteve po natančnosti, trdnosti in zanesljivosti priteznih čepov so visoke.
Uporaba:
- Za orodja s strmim konusom DIN 69871 in JIS B 6339 (MAS-BT).
- Na obdelovalnih centrih (strojih z avtomatsko zamenjavo orodij).
- Na NC-strojih (strojih brez avtomatske zamenjave orodij).
Opomba:
Pri montaži AB upoštevajte pravilen zatezni moment.
ISO 7388-3 ustreza staremu standardu DIN 69872.
ISO 7388-3 ustreza staremu standardu DIN 69872.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Pull stud, 18CrNiMo7 Form A 40 |
on request
In stock
5,599 pieces in stock
10,50 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
3,283 pieces in stock
9,25 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
861 pieces in stock
11,65 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
72 pieces in stock
11,65 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
80 pieces in stock
11,65 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Pull stud standard | ISO 7388-3 | ISO 7388-3 | ISO 7388-3 | MAS 403 | MAS 403 | MAS 403 |
| Overall length L | 54 mm | 54 mm | 54 mm | 60 mm | 60 mm | 60 mm |
| Thread M | M16 | M16 | M16 | M16 | M16 | M16 |
| L1 | 26 mm | 26 mm | 26 mm | 35 mm | 35 mm | 35 mm |
| suitable for steep tapers | 40 | 40 | 40 | 40 | 40 | 40 |
| Hole characteristics | with bore | z izvrtino | z izvrtino | z izvrtino | z izvrtino | z izvrtino |
| Type of product | Pull Stud | Pritezni čep | Pritezni čep | Pritezni čep | Pritezni čep | Pritezni čep |