{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
ISO code indexable insert | TCMT 110204 | |
Corner radius | 0.4 mm | |
Grade | HBT130 | |
Tool material | Carbide | |
Main application | M | |
Cutting conditions | slightly interrupted | |
Chip breaker | M | |
Cutting depth ap | 0.1 mm - 1 mm | |
Feed f | 0.05 mm/rev. - 0.2 mm/rev. | |
Cutting speed vc main application | 60 m/min - 220 m/min | |
Coating | TiCN | |
Number of changes/inserts | 3 | |
Finishing/roughing assignment | Skrubbearbejdning-sletbearbejdning | |
Type of product | Indexable insert for turning |
Article number | 260966 HBT130 | |
EAN / GTIN | 4062406257460 | |
Manufacturer number | 260966 HBT130 |
This article |
Recommendations |
|||||||
---|---|---|---|---|---|---|---|---|
TCMT 110204, Grade: HBT130 |
on request
In stock
435 pieces in stock
from
1
Pieces
11,76 €
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
9,80 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
694 pieces in stock
from
1
Pieces
9,30 €
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
7,75 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
264 pieces in stock
7,45 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
755 pieces in stock
from
1
Pieces
12,00 €
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
10,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
751 pieces in stock
from
1
Pieces
9,48 €
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
7,90 €
plus VAT at the current rate
Prices plus delivery costs
|
|||
Corner radius | 0.4 mm | 0.4 mm | 0,4 mm | 0,4 mm | 0,4 mm | 0,4 mm | 0,4 mm | 0,4 mm |
ISO code indexable insert | TCMT 110204 | TCMT 110204 | TCMT 16T304 | TCMT 16T304 | TCMT 110204 | TCMT 16T304 | TCMT 16T304 | TCMT 110204 |
Finishing/roughing assignment | Skrubbearbejdning-sletbearbejdning | Finishing | Schlichten | Schlichten | Schlichten | Schrupp-Schlichten | Schlichten | Schlichten |
Cutting conditions | slightly interrupted | continuous | kontinuierlich | leicht unterbrochen | leicht unterbrochen | leicht unterbrochen | leicht unterbrochen | leicht unterbrochen |
Cutting depth ap | 0.1 mm - 1 mm | 0.2 mm - 1.5 mm | 0,2 mm - 1,5 mm | 0,2 mm - 1,5 mm | 0,2 mm - 1,5 mm | 0,1 mm - 1 mm | 0,2 mm - 1,5 mm | 0,2 mm - 1,5 mm |
Feed f | 0.05 mm/rev. - 0.2 mm/rev. | 0.1 mm/rev. - 0.3 mm/rev. | 0,1 mm/U - 0,3 mm/U | 0,1 mm/U - 0,3 mm/U | 0,1 mm/U - 0,3 mm/U | 0,05 mm/U - 0,2 mm/U | 0,1 mm/U - 0,3 mm/U | 0,1 mm/U - 0,3 mm/U |
Main application | M | M | M | M | M | M | M | M |