{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
ISO code indexable insert | TCMT 110204 | |
Corner radius | 0.4 mm | |
Grade | HBT130 | |
Tool material | Carbide | |
Main application | M | |
Cutting conditions | slightly interrupted | |
Chip breaker | M | |
Cutting depth ap | 0.1 mm - 1 mm | |
Feed f | 0.05 mm/rev. - 0.2 mm/rev. | |
Cutting speed vc main application | 60 m/min - 220 m/min | |
Coating | TiCN | |
Number of changes/inserts | 3 | |
Finishing/roughing assignment | Skrubbearbejdning-sletbearbejdning | |
Type of product | Indexable insert for turning |
Article number | 260966 HBT130 | |
EAN / GTIN | 4062406257460 | |
Manufacturer number | 260966 HBT130 |
This article |
Recommendations |
|||||||
---|---|---|---|---|---|---|---|---|
TCMT 110204, Grade: HBT130 |
on request
In stock
154 pieces in stock
from
1
Pieces
€ 9,48
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
€ 7,90
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
177 pieces in stock
from
1
Pieces
€ 12,00
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
€ 10,00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
345 pieces in stock
from
1
Pieces
€ 11,76
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
€ 9,80
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
684 pieces in stock
from
1
Pieces
€ 9,30
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
€ 7,75
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
234 pieces in stock
€ 7,45
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
745 pieces in stock
|
on request
In stock
751 pieces in stock
|
|
Corner radius | 0.4 mm | 0,4 mm | 0,4 mm | 0,4 mm | 0,4 mm | 0,4 mm | 0,4 mm | 0,4 mm |
ISO code indexable insert | TCMT 110204 | TCMT 110204 | TCMT 16T304 | TCMT 16T304 | TCMT 110204 | TCMT 16T304 | TCMT 16T304 | TCMT 110204 |
Finishing/roughing assignment | Skrubbearbejdning-sletbearbejdning | Nabewerken | Nabewerken | Nabewerken | Nabewerken | Voor-/nabewerken | Nabewerken | Voor-/nabewerken |
Cutting conditions | slightly interrupted | continu | continu | licht onderbroken | licht onderbroken | licht onderbroken | licht onderbroken | licht onderbroken |
Cutting depth ap | 0.1 mm - 1 mm | 0,2 mm - 1,5 mm | 0,2 mm - 1,5 mm | 0,2 mm - 1,5 mm | 0,2 mm - 1,5 mm | 0,1 mm - 1 mm | 0,2 mm - 1,5 mm | 0,2 mm - 1,5 mm |
Feed f | 0.05 mm/rev. - 0.2 mm/rev. | 0,1 mm/omw. - 0,3 mm/omw. | 0,1 mm/omw. - 0,3 mm/omw. | 0,1 mm/omw. - 0,3 mm/omw. | 0,1 mm/omw. - 0,3 mm/omw. | 0,05 mm/omw. - 0,2 mm/omw. | 0,1 mm/omw. - 0,3 mm/omw. | 0,1 mm/omw. - 0,3 mm/omw. |
Main application | M | M | M | M | M | M | M | M |