{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
ISO code indexable insert | WNMG 080404 | |
Corner radius | 0.4 mm | |
Grade | CA025P | |
Tool material | Carbide | |
Main application | P | |
Cutting conditions | slightly interrupted | |
Chip breaker | WP | |
Cutting depth ap | 0.5 mm - 2 mm | |
Feed f | 0.07 mm/rev. - 0.3 mm/rev. | |
Cutting speed vc main application | 70 m/min - 420 m/min | |
Coating | CVD | |
Number of changes/inserts | 6 | |
Finishing/roughing assignment | Finishing | |
Produktart | Wendeschneidplatte zum Drehen |
Article number | 252013 CA025P | |
EAN / GTIN | 4960664865680 | |
Manufacturer number | TMH00328 |
This article |
Recommendations |
|||||
---|---|---|---|---|---|---|
KYOCERA Dreh-Wendeschneidplatte WNMG 080404, für Schlichtbearbeitung, Wiper, Sorte CA025P
on request
In stock
16 pieces in stock
16.82 €
9,70 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
637 pieces in stock
from
1
Pieces
12,66 €
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
10,55 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
334 pieces in stock
from
1
Pieces
12,66 €
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
10,55 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
363 pieces in stock
from
1
Pieces
13,17 €
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
10,97 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
366 pieces in stock
from
1
Pieces
14,60 €
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
12,17 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
287 pieces in stock
8,30 €
plus VAT at the current rate
Prices plus delivery costs
|
|
Number of changes/inserts | 6 | 6 | 6 | 6 | 6 | 6 |
Corner radius | 0.4 mm | 0,4 mm | 0,4 mm | 0,4 mm | 0,4 mm | 0,4 mm |
ISO code indexable insert | WNMG 080404 | WNMG 080404 | WNMG 080404 | WNMG 080404 | WNMG 080404 | WNMG 080404 |
Tool material | Carbide | HM | HM | HM | HM | HM |
Cutting conditions | slightly interrupted | leicht unterbrochen | kontinuierlich | stark unterbrochen | leicht unterbrochen | leicht unterbrochen |
Chip breaker | WP | SS | SS | SS | WSS | PF |
Cutting speed vc main application | 70 m/min - 420 m/min | 150 m/min - 400 m/min | 150 m/min - 500 m/min | 120 m/min - 350 m/min | 150 m/min - 400 m/min | 120 m/min - 330 m/min |