{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Indexable drill combination shank, 2×D, ⌀ DC: 33mm
Article no.: 232298 33
Article code:
- Drill depth for indexable insert drill up to: 2×D
- Shank: DIN 6535 HE, DIN 6595
- Use for drilling: Centre drilling; oblique spot drilling; limited cross-drilling; Aperture; oblique exit; convex
- Through-coolant: yes
- Machining strategy: MTC
Product details
Technical Data
| Nominal ⌀ D | 33 | |
| Drill depth for indexable insert drill up to | 2×D | |
| Shank | DIN 6535 HE, DIN 6595 | |
| Use for drilling | Centre drilling; oblique spot drilling; limited cross-drilling; Aperture; oblique exit; convex | |
| Through-coolant | yes | |
| Machining strategy | MTC | |
| Reach L1 | 66 mm | |
| Overhang LA | 95 mm | |
| Shank ⌀ Ds | 32 mm | |
| Shank length Ls | 60 mm | |
| Maximum adjustment limit Vmax | 0.5 mm | |
| ISO code indexable insert | WOEX 05T304 | |
| Pack of insert screws | 239700 8IP (1.3 Nm) | |
| Number of cutting edges Z | 1 | |
| Overall length L | 155 mm | |
| Type of product | Indexable drill |
Identification numbers & Classifications
| Article number | 232298 33 | |
| EAN / GTIN | 4045197677068 | |
| Manufacturer number | 232298 33 |
Description
Version:
High stability and very high process reliability.
Application:
For stationary and rotating application.
For holes free of withdrawal scoring and exact dimensional accuracy (approx. ± 0.1 mm).
Also suitable for machines with low drive power. Especially for MTC (Multi Task Cutting) use on the new generation of turning/milling centres (MTM).
For holes free of withdrawal scoring and exact dimensional accuracy (approx. ± 0.1 mm).
Also suitable for machines with low drive power. Especially for MTC (Multi Task Cutting) use on the new generation of turning/milling centres (MTM).
Suitable for:
Indexable inserts WOEX 05T304.
Note:
CAUTION!
A disc falls off when the drill exits.
Risk of injury if the component is rotating.
Please take safety precautions.
Counterboring tools with up to 2 steps to your specification available on request. (Minimum order quantity: 2 pieces).
A disc falls off when the drill exits.
Risk of injury if the component is rotating.
Please take safety precautions.
Counterboring tools with up to 2 steps to your specification available on request. (Minimum order quantity: 2 pieces).