{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HiPer-Drill base body, 5×D, ⌀ DC: 12,5mm
Article no.: 231610 12,5
Article code:
- Ausführung: 5×D
- Schaft: ISO 9766
- Bohrverwendung: bedingt Querbohren; bedingt Paketbohren; bedingt schräger Austritt; bedingt schräg Anbohren
- Anzahl Schneiden Z: 2
- Innenkühlung: ja
Product details
Technical Data
| Serie | HiPer-Drill | |
| Ausführung | 5×D | |
| Schaft | ISO 9766 | |
| Bohrverwendung | bedingt Querbohren; bedingt Paketbohren; bedingt schräger Austritt; bedingt schräg Anbohren | |
| Anzahl Schneiden Z | 2 | |
| Innenkühlung | ja | |
| ⌀-Bereich Dc | 12,5 mm - 12,99 mm | |
| Nutzlänge L1 | 65 mm | |
| Schaft-⌀ Ds | 16 mm | |
| Schaftlänge Ls | 48 mm | |
| Spannschraube | 231999 6IP (0,4 Nm) | |
| Gesamtlänge L | 135 mm | |
| Produktart | Wendeplattenbohrer |
Identification numbers & Classifications
| Article number | 231610 12,5 | |
| EAN / GTIN | 4045197716231 | |
| Manufacturer number | 231610 12,5 |
Description
Version:
- Very high feed rates and maximum performance due to optimally matched geometries and materials.
- Precise positioning of the cutter insert due to Vee insert seating and secure clamping by the centre bore.
- High concentricity when assembled. (For holes up to IT9 accuracy)
- Shank support for optimum stability in operation.
Created by an additive procedure.
Application:
For stationary and rotating use. For holes up to IT9 accuracy.
Note:
The insert screw must be replaced after every fifth change of cutter insert.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.