{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 63 mm | |
Number of cutting edges Z | 5 | |
Shank type | with bore | |
Setting angle κ | 90 degrees | |
Milling application | Circular milling; Ramping; End milling | |
Through-coolant | yes | |
maximum cutting depth ap max | 15.7 mm | |
Overall length Ltot | 40 mm | |
Mounting bore ⌀ | 22 mm | |
⌀ D3 | 56 mm | |
Circular interpolation milling ⌀ Dmin | 119 mm | |
Circular interpolation milling ⌀ Dmax | 124 mm | |
Ramping angle αmax | 0.26 degrees | |
Ramping length L for αmax | 54.6 mm | |
suitable indexable insert | BDMT 170408 | |
Insert screw | 229709 (T15; 3.5 Nm) | |
Type of product | End / face mill |
Article number | 227510 63/5 | |
EAN / GTIN | 4960664452767 | |
Manufacturer number | THN03426 |
This article |
Recommendations |
||
---|---|---|---|
![]() ![]() Indexable milling cutter 90° MEC17 63/5 mm |
|||
Mounting bore ⌀ | 22 mm | 22 mm | 22 mm |
Milling application | Circular milling; Ramping; End milling | End milling | |
Overall length Ltot | 40 mm | 40 mm | 40 mm |
Through-coolant | yes | yes | |
suitable indexable insert | BDMT 170408 | AP.. 16.. | ZDHT 1505 |
Shank type | with bore | with bore | |
Setting angle κ | 90 degrees | 90 degrees |