{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Softcut 90° shoulder mill MTC, Plain shank, ⌀ D / number of teeth Z: 32/3mm
Article no.: 215565 32/3
Article code:
- Setting angle κ: 90
- Milling application: End milling; Circular milling; Ramping
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Machining strategy: MTC
Product details
Technical Data
| Series | Softcut® | |
| Cutting edge ⌀ DC | 32 mm | |
| Number of cutting edges Z | 3 | |
| Shank type | Plain shank | |
| Setting angle κ | 90 degrees | |
| Milling application | End milling; Circular milling; Ramping | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Machining strategy | MTC | |
| Tool exchange | PowerCard | |
| Overhang L1 | 70 mm | |
| Overall length Ltot | 210 mm | |
| Shank ⌀ Ds h6 | 32 mm | |
| ⌀ D3 | 29 mm | |
| Circular interpolation milling ⌀ Dmin | 61 mm | |
| Circular interpolation milling ⌀ Dmax | 62 mm | |
| Circular interpolation milling ap | 1.9 mm | |
| Ramping angle αmax | 0.65 degrees | |
| Ramping length L for αmax | 26.5 mm | |
| suitable indexable insert | AP.. 1335.. | |
| Pack of insert screws | 219826 (8IP; 2.2 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 215565 32/3 | |
| EAN / GTIN | 4045197409089 | |
| Manufacturer number | 215565 32/3 |
Description
Uitvoering:
Precisie-hoekfrees met ongelijke steek voor extreem geluidsarm frezen, zeer hoge precisie en snijvermogen. Nieuwe generatie hoogrendement-wisselplaat-hoekfrezen met geometrie met snijkrachtvermindering voor MTC-toepassing in instabiele omstandigheden of voor spindels met gering aandrijfvermogen.
Toepassing:
Voor het hoekfrezen met grote dieptes, ook in massief. Universeel voor alle stalen materialen, roest- en zuurbestendige staalsoorten.
Reservedeel:
Wisselplaatschroevenset nr. 219826 (8IP; 2,2 Nm).
Tip:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
GARANT Softcut 90° shoulder mill MTC, Plain shank, ⌀ D / number of teeth Z: 32/3mm |
on request
In stock
23 pieces in stock
254,41 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 3 | 3 |
| Overhang L1 | 70 mm | 50 mm |
| Milling application | End milling; Circular milling; Ramping | Frezare pe colţ |
| suitable indexable insert | AP.. 1335.. | AP.. 16.. |
| Shank type | Plain shank | Coadă Weldon |
| Cutting edge ⌀ DC | 32 mm | 32 mm |
| Setting angle κ | 90 degrees | 90 grad |