{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Softcut® indexable chamfer mill MTC 30 °
Article no.: 215152 30
Article code:
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Machining strategy: MTC
- Tool exchange: PowerCard
Product details
Technical Data
| suitable indexable insert | AP.T 1805.. | |
| Series | Softcut® | |
| Angle γ | 30 degrees | |
| Shank type | with bore | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Machining strategy | MTC | |
| Tool exchange | PowerCard | |
| Number of effective inserts Zeff | 3 | |
| Number of indexable inserts | 6 | |
| Overall length Ltot | 50 mm | |
| smallest ⌀ D | 35 mm | |
| largest ⌀ D1 | 85 mm | |
| achievable chamfer width b | 24.3 mm | |
| achievable chamfer length l | 29.5 mm | |
| achievable chamfer height h | 14 mm | |
| Mounting bore ⌀ | 27 mm | |
| Feed rate per tooth at hmax | 0.2 mm | |
| Pack of insert screws | 219808 (15IP; 3.8 Nm) | |
| Type of product | Indexable end mill |
Identification numbers & Classifications
| Article number | 215152 30 | |
| EAN / GTIN | 4045197798893 | |
| Manufacturer number | 215152 30 |
Description
Exécution:
Fraise à chanfreiner à alésage. Assise de plaquette fermée de plusieurs côtés pour stabilisation des arêtes et absorption des forces verticales et radiales.
Utilisation:
Pour des largeurs de chanfrein élevées dans la construction métallique. Idéale pour les applications d'ébauche et de semi-ébauche.