{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
- Milling application: End milling; Ramping; End milling
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Machining strategy: HPC
- Tool exchange: PowerCard
Product details
Technical Data
| Cutting edge ⌀ DC | 66 mm | |
| Number of cutting edges Z | 8 | |
| Shank type | with bore | |
| Milling application | End milling; Ramping; End milling | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Tool exchange | PowerCard | |
| maximum cutting depth ap max | 3 mm | |
| Overall length Ltot | 50 mm | |
| Mounting bore ⌀ | 27 mm | |
| suitable indexable insert | CPHX 09T3.. | |
| Pack of insert screws | 219799 4 (15IP; 3.8 Nm) | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 212542 66/8 | |
| EAN / GTIN | 4062406098681 | |
| Manufacturer number | 212542 66/8 |
Description
Version:
Precision finish milling for extremely efficient en pre-finish machining and finish machining. Due to the revised wiper geometry, suitable for outstanding surface quality in ground finish standard. Extreme time saving available due to a large line skip and a high feed rate per tooth.
Application:
Typical tool for tool and die manufacturing.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Finishing mill 66/8 mm |
||
| Number of cutting edges Z | 8 | 8 |
| Mounting bore ⌀ | 27 | 22 |
| Milling application | End milling ;Ramping ;End milling | Circular milling ;Circular milling ;Plunging |
| Through-coolant | yes | yes |
| Shank type | with bore | with bore |
| Cutting edge ⌀ DC | 66 | 66 |
| Machining strategy | HPC | HPC |