{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide slot drill 16 mm
Article no.: 201650 16
Article code:
- Tool material: Solid carbide
- Norm: DIN 6527
- Type: N
- Tolerance nominal ⌀: h10
- No. of teeth Z: 2
Product details
Technical Data
| Cutting edge ⌀ DC | 16 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Norm | DIN 6527 | |
| Type | N | |
| Tolerance nominal ⌀ | h10 | |
| No. of teeth Z | 2 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 32 mm | |
| Overall length L | 92 mm | |
| Shank ⌀ Ds | 16 mm | |
| Corner chamfer width at 45° | 0.1 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.08 mm | |
| Feed fz for side milling in steel < 750 N/mm2 | 0.1 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 201650 16 | |
| EAN / GTIN | 4045197113634 | |
| Manufacturer number | 201650 16 |
Application Table
N
280
N
200
P
120
P
105
P
100
M
80
M
60
K
90
Description
Version:
Eccentric relief ground for stronger cutting edges.
Dimensions similar to DIN 6527.
Dimensions similar to DIN 6527.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Solid carbide slot drill 16 mm |
||||||
| Corner chamfer angle | 45 | 45 | 45 | 45 | 45 | 45 |
| Colour ring | green | without | without | blue | green | green |
| Norm | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 | Manufacturer’s standard | DIN 6527 |
| Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
| Cutting edge ⌀ DC | 16 | 16 | 16 | 16 | 16 | 16 |
| No. of teeth Z | 2 | 3 | 3 | 2 | 3 | 2 |
| Corner chamfer width at 45° | 0.1 | 0.1 | 0.4 | 0.3 | 0.06 | 0.1 |