{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide side milling cutter HPC 100X8 mm
Article no.: 185015 100X8
Article code:
- Tool material: Solid carbide
- Standard: DIN 885 A
- Type: N
- Tolerance nominal ⌀: ± 0.1
- Cutting width ae for milling operation: Full slot cutting depth 1×D
Product details
Technical Data
| Cutting edge ⌀ DC | 100 mm | |
| Cutting width | 8 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 885 A | |
| Type | N | |
| Tolerance nominal ⌀ | ± 0.1 | |
| Bore ⌀ H6 d1 | 27 mm | |
| No. of teeth Z | 18 | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D | |
| Machining strategy | HPC | |
| Collar thickness b ±0.1 | 5 mm | |
| Collar ⌀ d2 ±1 | 60 mm | |
| Tooth height Zh | 20 mm | |
| Capability of combining 2 cutters of the same width A/B | 8 mm | |
| Capability of combining 2 cutters of the same width, results in overall width E | 14.5 mm - 15.8 mm | |
| Capability of combining 2 cutters of different width A | 8 mm | |
| Capability of combining 2 cutters of different width B | 10 mm | |
| Capability of combining 2 cutters of different width, results in overall width E | 16.6 mm - 17.8 mm | |
| Feed fz in steel < 900 N/mm2 | 0.045 mm | |
| Through-coolant | no | |
| Shank type | with bore | |
| Colour ring | without | |
| Type of product | Side milling cutter |
Identification numbers & Classifications
| Article number | 185015 100X8 | |
| EAN / GTIN | 4062406397593 | |
| Manufacturer number | 185015 100X8 |
Application Table
N
280
N
280
N
200
P
120
P
110
P
100
P
90
P
75
M
45
K
70
N
300
Description
Version:
Precision solid carbide side milling cutters in the HPC machining range. With new high-performance coating for very long tool life.
Use as a set: Cutters with the same ⌀ and same number of teeth can be combined as a set and adjusted to the required width. Since the cutters have no raised bore collar, the staggered teeth mesh with each other.
2-piece sets are particularly economical. By reversing the side milling cutters, both side edges of each cutter can be used.
Use as a set: Cutters with the same ⌀ and same number of teeth can be combined as a set and adjusted to the required width. Since the cutters have no raised bore collar, the staggered teeth mesh with each other.
2-piece sets are particularly economical. By reversing the side milling cutters, both side edges of each cutter can be used.
Note:
- Do not clamp the cutters in a set without a sufficiently thick arbor spacer ring, otherwise the cutters will be damaged.
- See Product Group 30 for suitable arbor spacer rings.
- Slots milled from solid: fz for ae = 0.1×D.
Successor product to No. 185010.