{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
External ⌀ | 20.5 mm | |
Coating | TiAlN | |
Countersink tip angle | 90 degrees | |
Tool material | HSS | |
Spacing of the countersink cutting edges | unequal spacing | |
Number of cutting edges Z | 3 | |
Standard | Manufacturer’s standard | |
Shank | Three clamping flats to h9 | |
Through-coolant | no | |
smallest countersink ⌀ for holes from | 3.5 mm | |
Overall length L | 114 mm | |
Shank ⌀ Ds | 10 mm | |
for countersunk screws DIN 7991 | M10 | |
Feed f in steel < 500 N/mm2 | 0.22 mm/rev. | |
Shank tolerance | h9 | |
Colour ring | green | |
Pre-drill ⌀ | 3.5 mm | |
Type of product | Stepped drill and countersink |
Article number | 150376 20,5 | |
EAN / GTIN | 4062406066031 | |
Manufacturer number | 150376 20,5 |
This article |
Recommendations |
||||
---|---|---|---|---|---|
![]() ![]() High-precision countersink, long, with 3 drive flats 90° 20,5 mm |
|||||
Coating | TiAlN | TiAlN | uncoated | AlTiCN | TiAlN |
for countersunk screws DIN 7991 | M10 | M10 | M10 | M10 | M10 |
Through-coolant | no | no | no | no | no |
Countersink tip angle | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
Shank | Three clamping flats to h9 | Shank with h9 and three drive flats | Shank with h9 and three drive flats | Shank with h9 and three drive flats | Three clamping flats to h9 |
Shank tolerance | h9 | h9 | h9 | h9 | h9 |
Type of product | Stepped drill and countersink | Stepped drill and countersink | Stepped drill and countersink | Stepped drill and countersink | Stepped drill and countersink |