{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
External ⌀ | 10.4 mm | |
Coating | TiAlN | |
Countersink tip angle | 90 degrees | |
Tool material | HSS | |
Spacing of the countersink cutting edges | unequal spacing | |
Number of cutting edges Z | 3 | |
Standard | Manufacturer’s standard | |
Shank | Three clamping flats to h9 | |
Through-coolant | no | |
smallest countersink ⌀ for holes from | 2.5 mm | |
Overall length L | 107 mm | |
Shank ⌀ Ds | 6 mm | |
for countersunk screws DIN 7991 | M5 | |
Feed f in steel < 500 N/mm2 | 0.13 mm/rev. | |
Shank tolerance | h9 | |
Colour ring | green | |
Pre-drill ⌀ | 2.5 mm | |
Type of product | Stepped drill and countersink |
Article number | 150376 10,4 | |
EAN / GTIN | 4062406066000 | |
Manufacturer number | 150376 10,4 |
This article |
Recommendations |
||||
---|---|---|---|---|---|
![]() ![]() High-precision countersink, long, with 3 drive flats 90° 10,4 mm |
|||||
External ⌀ | 10.4 mm | 10.4 mm | 10.4 mm | 10.4 mm | 10.4 mm |
Coating | TiAlN | TiAlN | uncoated | AlTiCN | TiAlN |
Colour ring | green | green | without | blue | green |
Overall length L | 107 mm | 50 mm | 50 mm | 50 mm | 50 mm |
Shank tolerance | h9 | h9 | h9 | h9 | h9 |
smallest countersink ⌀ for holes from | 2.5 mm | 2.5 mm | 2.5 mm | 2.5 mm | 2.5 mm |
Type of product | Stepped drill and countersink | Stepped drill and countersink | Stepped drill and countersink | Stepped drill and countersink | Stepped drill and countersink |