{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
DOVEIQMILL face mill, with bore, ⌀ DC / number of effective cutting edges Z: 50/5mm
Article no.: 222500 50/5
Article code:
New product
- Number of cutting edges Z: 5
- Setting angle κ: 50
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
Product details
Technical Data
| Series | DOVEIQMILL | |
| Cutting edge ⌀ DC | 50 mm | |
| Number of cutting edges Z | 5 | |
| Shank type | with bore | |
| Setting angle κ | 50 degrees | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| maximum cutting depth ap max | 4.6 mm | |
| maximum external ⌀ Dmax | 59.4 mm | |
| Overall length Ltot | 40 mm | |
| Mounting bore ⌀ | 22 mm | |
| suitable indexable insert | SYHU0704.. | |
| Manufacturer's designation | IQ845 FSY D050-05-22-R07 | |
| Type of product | Face Mill |
Identification numbers & Classifications
| Article number | 222500 50/5 | |
| EAN / GTIN | 7291075311365 | |
| Manufacturer number | 3106523 |
Description
Version:
Extremely stable face milling system. The indexable inserts are fixed by means of screw clamping and by additional fixing in a dovetail-like insert seating. The positive axial installation position of the plates results in a very soft cut and thus guarantees the best surface qualities. Maximum cost-effectiveness due to 8-cutter indexable inserts.
Spare part:
Pack of insert screws No. 229695 4 (IP15; 4.8 Nm).
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
DOVEIQMILL face mill, with bore, ⌀ DC / number of effective cutting edges Z: 50/5mm
on request
In stock
7 pieces in stock
€604.90
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
4 pieces in stock
€454.25
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
28 pieces in stock
€587.65
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
24 pieces in stock
€461.15
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
39 pieces in stock
€425.50
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 5 | 5 | 5 | 5 | 5 |
| Through-coolant | yes | yes | yes | no | yes |
| suitable indexable insert | SYHU0704.. | SE.. 1204.. | SN.U; ON.U | SE.. 1204.. | SE.T1305; XEEW1305 |
| Shank type | with bore | with bore | with bore | with bore | with bore |
| Cutting edge ⌀ DC | 50 mm | 50 mm | 50 mm | 50 mm | 50 mm |
| Spacing of the cutters | unequal spacing | unequal spacing | unequal spacing | unequal spacing | unequal spacing |
| Type of product | Face Mill | Face mill | Face mill | Face mill | Face mill |