{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Series | Master Alu | |
Cutting edge ⌀ DC | 10 mm | |
Coating | uncoated | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Type | W | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 3 | |
Helix angle | 42 degrees | |
Helix angle characteristic | unequal spacing | |
Spacing of the cutters | unequal spacing | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; Full slot cutting depth 1×D | |
Shank | DIN 6535 HA to h6 | |
Balance quality with shank | G 2.5 with HA | |
Through-coolant | no | |
Machining strategy | HPC | |
Flute length Lc | 22 mm | |
Overhang length L1 incl. recess | 30 mm | |
Recess ⌀ D1 | 9.8 mm | |
Overall length L | 72 mm | |
Shank ⌀ Ds | 10 mm | |
Corner chamfer angle | 90 degrees | |
Feed fz for slot milling in short-chipping aluminium | 0.09 mm | |
Feed fz for side milling in short-chipping aluminium | 0.12 mm | |
Colour ring | yellow | |
Type of product | End / face mill |
Article number | 202002 10 | |
EAN / GTIN | 4062406125790 | |
Manufacturer number | 202002 10 |
This article |
Recommendations |
|||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
GARANT Master Alu PickPocket solid carbide roughing end mill HPC, uncoated, ⌀ e8 DC: 10mm
on request
In stock
73 pieces in stock
€92.92
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
142 pieces in stock
€89.47
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
176 pieces in stock
€46.81
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
79 pieces in stock
€143.75
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
209 pieces in stock
€80.04
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
308 pieces in stock
€80.04
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
705 pieces in stock
€93.15
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
463 pieces in stock
€93.15
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
205 pieces in stock
€60.03
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
54 pieces in stock
€104.65
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
27 pieces in stock
€111.55
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
67 pieces in stock
€87.86
plus VAT at the current rate
Prices plus delivery costs
|
|
Coating | uncoated | DLC | uncoated | DLC | uncoated | uncoated | DLC | DLC | uncoated | DLC | uncoated | DLC |
Corner chamfer angle | 90 degrees | 45 degrees | 45 degrees | 90 degrees | 45 degrees | 90 degrees | 45 degrees | 90 degrees | 90 degrees | 45 degrees | 90 degrees | 90 degrees |
Cutting edge ⌀ DC | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm |
Helix angle | 42 degrees | 45 degrees | 45 degrees | 20 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 42 degrees | 38 degrees |
No. of teeth Z | 3 | 2 | 2 | 2 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 2 |
Shank ⌀ Ds | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm |
Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |