{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Series | Master Alu | |
Cutting edge ⌀ DC | 6 mm | |
Coating | uncoated | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Type | W | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 3 | |
Helix angle | 42 degrees | |
Helix angle characteristic | unequal spacing | |
Spacing of the cutters | unequal spacing | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; Full slot cutting depth 1×D | |
Shank | DIN 6535 HA to h6 | |
Balance quality with shank | G 2.5 with HA | |
Through-coolant | no | |
Machining strategy | HPC | |
Flute length Lc | 13 mm | |
Overhang length L1 incl. recess | 19 mm | |
Recess ⌀ D1 | 5.8 mm | |
Overall length L | 57 mm | |
Shank ⌀ Ds | 6 mm | |
Corner chamfer angle | 90 degrees | |
Feed fz for slot milling in short-chipping aluminium | 0.06 mm | |
Feed fz for side milling in short-chipping aluminium | 0.08 mm | |
Colour ring | yellow | |
Type of product | End / face mill |
Article number | 202002 6 | |
EAN / GTIN | 4062406125738 | |
Manufacturer number | 202002 6 |
This article |
Recommendations |
|||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
GARANT Master Alu PickPocket solid carbide roughing end mill HPC, uncoated, ⌀ e8 DC: 6mm
on request
In stock
219 pieces in stock
€50.72
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1,198 pieces in stock
€56.70
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
451 pieces in stock
€24.38
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
158 pieces in stock
€92.23
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
302 pieces in stock
€42.32
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
482 pieces in stock
€42.32
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
262 pieces in stock
€53.71
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
524 pieces in stock
€53.71
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
353 pieces in stock
€30.13
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
100 pieces in stock
€57.73
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
78 pieces in stock
€60.95
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
54 pieces in stock
€55.66
plus VAT at the current rate
Prices plus delivery costs
|
|
Coating | uncoated | DLC | uncoated | DLC | uncoated | uncoated | DLC | DLC | uncoated | DLC | uncoated | DLC |
Corner chamfer angle | 90 degrees | 45 degrees | 45 degrees | 90 degrees | 45 degrees | 90 degrees | 45 degrees | 90 degrees | 90 degrees | 45 degrees | 90 degrees | 90 degrees |
Cutting width ae for milling operation | Full slot cutting depth 1×D; Full slot cutting depth 1×D | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0,25×D ved beskæring | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; Full slot cutting depth 1×D | Full slot cutting depth 1×D; 0.5×D for side milling |
Through-coolant | no | no | no | no | no | no | no | no | no | no | no | no |
Flute length Lc | 13 mm | 13 mm | 13 mm | 16 mm | 13 mm | 13 mm | 13 mm | 13 mm | 12 mm | 13 mm | 13 mm | 13 mm |
Tool material | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |