{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Nominal ⌀ DC | 1.35 mm | |
Coating | uncoated | |
Tool material | HSS | |
Standard | DIN 338 | |
Type | N | |
Tolerance nominal ⌀ | h8 | |
Point angle | 118 degrees | |
Shank | Plain shank | |
Number of cutting edges Z | 2 | |
Through-coolant | no | |
recommended maximum drilling depth L2 | 16 mm | |
Flute length Lc | 18 mm | |
Overall length L | 40 mm | |
Shank ⌀ Ds | 1.35 mm | |
Feed f in steel < 750 N/mm2 | 0.03 mm/rev. | |
Colour ring | without | |
Type of product | Jobber drill |
Article number | 114150 1,35 | |
EAN / GTIN | 4045197012494 | |
Manufacturer number | 114150 1,35 |
This article |
Recommendations |
|
---|---|---|
HSS jobber drill N, uncoated, ⌀ DC h8 (mm or inch): 1,35
on request
In stock
123 pieces in stock
from
1
Pieces
€4.12
plus VAT at the current rate
Prices plus delivery costs
from
5
Pieces
€3.43
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
30 pieces in stock
€1.61
plus VAT at the current rate
Prices plus delivery costs
|
|
Number of cutting edges Z | 2 | 2 |
Coating | uncoated | uncoated |
Standard | DIN 338 | DIN 338 |
Point angle | 118 degrees | 118 degrees |
Tolerance nominal ⌀ | h8 | h8 |
Flute length Lc | 18 mm | 18 mm |
recommended maximum drilling depth L2 | 16 mm | 16 mm |