{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
WNMG 080404, Grade: HB7120-1
Article no.: 252068 HB7120-1
Article code:
Product details
Technical Data
| ISO code indexable insert | WNMG 080404 | |
| Corner radius | 0.4 mm | |
| Grade | HB7120-1 | |
| Tool material | Carbide | |
| Main application | M | |
| Cutting conditions | continuous | |
| Chip breaker | VM | |
| Tolerance | M | |
| Cutting depth ap | 0.5 mm - 4 mm | |
| Feed f | 0.1 mm/rev. - 0.5 mm/rev. | |
| Cutting speed vc main application | 80 m/min - 260 m/min | |
| Number of changes/inserts | 6 | |
| Finishing/roughing assignment | Skrubbearbejdning-sletbearbejdning | |
| Type of product | Indexable insert for turning |
Identification numbers & Classifications
| Article number | 252068 HB7120-1 | |
| EAN / GTIN | 4045197820174 | |
| Manufacturer number | 252068 HB7120-1 |
Application Table
M
M
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||||
|---|---|---|---|---|---|---|---|
WNMG 080404, Grade: HB7120-1 |
on request
In stock
558 pieces in stock
8,14 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
2,363 pieces in stock
8,14 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1,902 pieces in stock
|
||||
| ISO code indexable insert | WNMG 080404 | WNMG 080404 | WNMG 080408 | WNMG 080408 | WNMG 080404 | WNMG 080408 | WNMG 080408 |
| Finishing/roughing assignment | Skrubbearbejdning-sletbearbejdning | Semi-roughing | Skrubbearbejdning-sletbearbejdning | hrubovanie a dokoncovanie | hrubovanie a dokoncovanie | hrubovanie a dokoncovanie | hrubovanie a dokoncovanie |
| Cutting conditions | continuous | slightly interrupted | continuous | lahko prerušovaný | lahko prerušovaný | lahko prerušovaný | lahko prerušovaný |
| Grade | HB7120-1 | HB7140-1 | HB7120-1 | HB7140-1 | HBT130 | HBT130 | HB7130-2 |
| Feed f | 0.1 mm/rev. - 0.5 mm/rev. | 0.1 mm/rev. - 0.5 mm/rev. | 0.1 mm/rev. - 0.5 mm/rev. | 0,1 mm/ot. - 0,5 mm/ot. | 0,12 mm/ot. - 0,45 mm/ot. | 0,12 mm/ot. - 0,45 mm/ot. | 0,1 mm/ot. - 0,5 mm/ot. |
| Cutting speed vc main application | 80 m/min - 260 m/min | 60 m/min - 230 m/min | 80 m/min - 260 m/min | 60 m/min - 230 m/min | 50 m/min - 200 m/min | 50 m/min - 200 m/min | 70 m/min - 240 m/min |
| Type of product | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning | Otočné rezné platničky na sústruženie | Otočné rezné platničky na sústruženie | Otočné rezné platničky na sústruženie |