{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Nominal ⌀ D | 35 | |
Drill depth for indexable insert drill up to | 2×D | |
Shank | DIN 6535 HE, DIN 6595 | |
Use for drilling | Centre drilling; oblique spot drilling; limited cross-drilling; Aperture; oblique exit; convex | |
Through-coolant | yes | |
Machining strategy | MTC | |
Reach L1 | 70 mm | |
for inch ⌀ | 1 3/8 in | |
Overhang LA | 99 mm | |
Shank ⌀ Ds | 32 mm | |
Shank length Ls | 60 mm | |
Maximum adjustment limit Vmax | 0.5 mm | |
ISO code indexable insert | WOEX 05T304 | |
Pack of insert screws | 239700 8IP (1.3 Nm) | |
Number of cutting edges Z | 1 | |
Overall length L | 159 mm | |
Type of product | Indexable drill |
Article number | 232298 35 | |
EAN / GTIN | 4045197677082 | |
Manufacturer number | 232298 35 |
This article |
Recommendations |
||
---|---|---|---|
![]() ![]() Indexable drill combination shank 35 mm |
|||
Number of cutting edges Z | 1 | 1 | 1 |
Use for drilling | Centre drilling; oblique spot drilling; limited cross-drilling; Aperture; oblique exit; convex | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited oblique spot drilling |
ISO code indexable insert | WOEX 05T304 | SOGX 110509 | SOMT110408 / XOMT110406 |
Shank | DIN 6535 HE, DIN 6595 | ISO 9766 | ISO 9766 |
Shank ⌀ Ds | 32 mm | 40 mm | 32 mm |
Type of product | Indexable drill | Indexable drill | Indexable drill |
Overhang LA | 99 mm | 96 mm | 101 mm |