{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
High feed rate milling cutter MFH mini 42/7 mm
Article no.: 221960 42/7
Article code:
- Fräsverwendung: Circular milling; Ramping; Plunging
- Zerspanungsstrategie: HPC
- Passaggio interno per LR: ja
Product details
Technical Data
| ⌀ Tagliente DC | 42 mm | |
| Numero taglienti Z | 7 | |
| Schaftausführung | with thread | |
| Fräsverwendung | Circular milling; Ramping; Plunging | |
| Zerspanungsstrategie | HPC | |
| Passaggio interno per LR | ja | |
| ⌀ D3 | 35 mm | |
| Profondità di taglio massima ap max | 1 mm | |
| Lunghezza complessiva Lcompl. | 40 mm | |
| Sede filettata M | M16 | |
| Fresatura a interpolazione ⌀ Dmin. | 77 mm | |
| Fresatura a interpolazione ⌀ Dmax. | 82 mm | |
| Angolo rampa αmax. | 0,52 grado | |
| Lunghezza rampa L per αmax. | 33,3 mm | |
| Inserto adatto | LOGU 0303.. | |
| Vite inserto | 229713 (8IP; 1,2 Nm) | |
| Produktart | Copy mill |
Identification numbers & Classifications
| Article number | 221960 42/7 | |
| EAN / GTIN | 2050001929969 | |
| Manufacturer number | TX781476 |
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
High feed rate milling cutter MFH mini 42/7 mm |
on request
Delivery in 1 - 2 weeks
0 pieces in stock
CHF 437.00
plus VAT at the current rate
Prices plus delivery costs
|
|
| Fräsverwendung | Circular milling; Ramping; Plunging | Plunging; Fresatura circolare; Plunging |
| Lunghezza complessiva Lcompl. | 40 mm | 40 mm |
| ⌀ Tagliente DC | 42 mm | 42 mm |
| Zerspanungsstrategie | HPC | HPC |
| ⌀ D3 | 35 mm | 36 mm |
| Angolo rampa αmax. | 0,52 grado | 0,58 grado |
| Lunghezza rampa L per αmax. | 33,3 mm | 34,4 mm |