{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Softcut chamfer mill MTC, with bore, Angle γ: 60°
Article no.: 215540 60
Article code:
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Machining strategy: MTC
- Tool exchange: PowerCard
Product details
Technical Data
| suitable indexable insert | AP.T 1335.. | |
| Series | Softcut® | |
| Angle γ | 60 degrees | |
| Shank type | with bore | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Machining strategy | MTC | |
| Tool exchange | PowerCard | |
| Number of effective inserts Zeff | 3 | |
| Number of indexable inserts | 9 | |
| Overall length Ltot | 52 mm | |
| smallest ⌀ D | 17 mm | |
| largest ⌀ D1 | 47 mm | |
| achievable chamfer width b | 14.7 mm | |
| achievable chamfer length l | 29.5 mm | |
| achievable chamfer height h | 25.5 mm | |
| Mounting bore ⌀ | 16 mm | |
| Feed rate per tooth at hmax | 0.12 mm | |
| Pack of insert screws | 219826 (8IP; 2.2 Nm) | |
| Type of product | Indexable end mill |
Identification numbers & Classifications
| Article number | 215540 60 | |
| EAN / GTIN | 4045197809711 | |
| Manufacturer number | 215540 60 |
Description
Version:
Robust plug-in chamfer mill. Insert seat enclosed on several sides for stabilisation of the cutters and to take up the vertical and radial forces.
Application:
For wide chamfers in steel fabrications. Outstandingly suitable for roughing and semi-roughing applications.