{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter MTC, AlCrN, ⌀ f8 DC: 4mm
Article no.: 202396 4
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: N
- Tolerance nominal ⌀: f8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 4 mm | |
| Coating | AlCrN | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | N | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Balance quality with shank | G 2.5 with HB | |
| Through-coolant | no | |
| Machining strategy | MTC | |
| Flute length Lc | 11 mm | |
| Overhang length L1 incl. recess | 16 mm | |
| Recess ⌀ D1 | 3.9 mm | |
| Overall length L | 57 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer width at 45° | 0.1 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.02 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.024 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202396 4 | |
| EAN / GTIN | 4045197857484 | |
| Manufacturer number | 202396 4 |
Application Table
P
250
P
220
P
200
P
190
P
170
H
90
H
60
M
130
M
100
S
50
K
160
Description
Version:
Special flute profile. Strengthened core.
MTC rough milling up to 1.5×D in solid material.
Eccentric relief ground.
Lengths similar to DIN 6527 long.
Improved coating for a further reduction in cutting force combined with increased tool life.
MTC rough milling up to 1.5×D in solid material.
Eccentric relief ground.
Lengths similar to DIN 6527 long.
Improved coating for a further reduction in cutting force combined with increased tool life.
Application:
Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||||
|---|---|---|---|---|---|---|---|---|
Solid carbide milling cutter MTC, AlCrN, ⌀ f8 DC: 4mm |
||||||||
| Overhang length L1 incl. recess | 16 mm | 16 mm | 17 mm | 15 mm | 16 mm | 17 mm | 17 mm | 17 mm |
| Coating | AlCrN | SiTiN | AlCrN | TiAlN | TiAlN | TiSiN | TiSiN | TiSiN |
| Overall length L | 57 mm | 57 mm | 57 mm | 57 mm | 57 mm | 57 mm | 57 mm | 57 mm |
| Flute length Lc | 11 mm | 11 mm | 11 mm | 11 mm | 11 mm | 11 mm | 11 mm | 11 mm |
| Helix angle | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 40 degrees | 42 degrees | 42 degrees | 42 degrees |
| No. of teeth Z | 3 | 3 | 4 | 3 | 4 | 4 | 4 | 3 |
| Machining strategy | MTC | MTC | MTC | HPC | HPC | MTC | MTC | HPC |