{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide roughing end mill MTC, AlCrN, ⌀ e8 DC: 4mm
Article no.: 203061 4
Article code:
- Tool material: solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 4 mm | |
| Coating | AlCrN | |
| Tool material | solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 4 | |
| Helix angle | 45 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.3×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Balance quality with shank | G 2.5 with HB | |
| Through-coolant | no | |
| Machining strategy | MTC | |
| Flute length Lc | 11 mm | |
| Overhang length L1 incl. recess | 17 mm | |
| Recess ⌀ D1 | 3.8 mm | |
| Overall length L | 57 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer width at 45° | 0.1 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.058 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification & Classification
| Article number | 203061 4 | |
| EAN / GTIN | 4045197775887 | |
| Manufacturer number | 203061 4 | |
| Manufacturer | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
250
P
230
P
200
P
180
P
150
M
70
M
50
K
150
Description
Version:
For roughing and finishing up to 1.5×D into solid material at very high feed rates with smooth cutting action.
For cutting force reduction and better surface quality due to 45° helix.
Improved coating for a further reduction in cutting force combined with increased tool life.
For cutting force reduction and better surface quality due to 45° helix.
Improved coating for a further reduction in cutting force combined with increased tool life.
Application:
Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres.