{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
High performance end mill 13 mm
Article no.: 191870 13
Article code:
- Tool material: HSS Co 8
- Norm: Manufacturer’s standard
- Milling profile: NF
- Tolerance nominal ⌀: js12
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 13 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Norm | Manufacturer’s standard | |
| Milling profile | NF | |
| Tolerance nominal ⌀ | js12 | |
| No. of teeth Z | 4 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 55 mm | |
| Overall length L | 110 mm | |
| Shank ⌀ Ds | 16 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.04 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 191870 13 | |
| EAN / GTIN | 4045197105745 | |
| Manufacturer number | 191870 13 |
Application Table
N
83
P
28
P
23
P
23
K
23
N
55
Description
Version:
Multi-flute mills with ground chip breaker on flutes.
End cutting teeth for plunging.
Special surface treatment.
End cutting teeth for plunging.
Special surface treatment.
Advantage:
Applicable as finishing cutter with particularly high cutting performance.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
High performance end mill 13 mm |
||||||
| Corner chamfer angle | 90 | 90 | 90 | 90 | 90 | 90 |
| Through-coolant | no | no | no | no | no | no |
| Norm | Manufacturer’s standard | DIN 844 B | DIN 844 B | DIN 844 B | DIN 844 B | Manufacturer’s standard |
| Shank | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 |
| Cutting edge ⌀ DC | 13 | 13 | 13 | 13 | 13 | 13 |
| Tool material | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS Co 8 |
| Shank ⌀ Ds | 16 | 12 | 12 | 12 | 12 | 16 |