{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Machine reamer configurable, uncoated, Nominal ⌀ DC: 32mm
Article no.: 164180 32
Article code:
- Tool material: HSS E
- Standard: DIN 208 B
- Helix angle: 7-8
- Through-coolant: no
- Shank: Morse taper
Product details
Technical Data
| Nominal ⌀ DC | 32 mm | |
| Coating | uncoated | |
| Tool material | HSS E | |
| Standard | DIN 208 B | |
| Helix angle | 7-8 degrees | |
| Through-coolant | no | |
| Shank | Morse taper | |
| Application for type of drilling | for through hole | |
| ⌀ range | 31.060 mm - 32.050 mm | |
| Flute length Lc | 77 mm | |
| Overhang L1 | 190 mm | |
| Overall length L | 317 mm | |
| Number of cutting edges Z | 10 | |
| Morse taper MT size | 4 | |
| Feed f in steel < 750 N/mm2 | 0.3 mm/rev. | |
| Reaming oversize in diameter | 0.3 mm - 0.5 mm | |
| Colour ring | without | |
| Configurable tolerances | C; CD; D; E; EF; F; FG; G; H; I; J; JS; O; L; M; N; O; P; Q; R; S; T; U; V; W; X | |
| Configurable qualities | 5; 6; 7; 8; 9; 10; 11; 12; 13 | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 164180 32 | |
| EAN / GTIN | 4045197092717 | |
| Manufacturer number | 164180 32 |
Application Table
N
20
N
20
P
15
P
10
P
7
P
5
P
4
M
5
M
5
S
5
K
5
N
13
Description
Version:
Reamers finish ground to match your specification.
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Application:
For reaming through holes, as the chips are evacuated in the cutting direction. Also suitable for blind holes due to the short chamfer lead.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Machine reamer configurable, uncoated, Nominal ⌀ DC: 32mm |
||||
| Number of cutting edges Z | 10 | 10 | 10 | 10 |
| Overhang L1 | 190 mm | 190 mm | 168 mm | 165 mm |
| Overall length L | 317 mm | 317 mm | 265 mm | 265 mm |
| Nominal ⌀ DC | 32 mm | 32 mm | 32 mm | 32 mm |
| Flute length Lc | 77 mm | 77 mm | 133 mm | 133 mm |
| Tool material | HSS E | HSS E | HSS | HSS |
| Helix angle | 7-8 degrees | 7-8 degrees | 7-8 degrees | 7-8 degrees |