{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Machine reamer configurable 11,5 mm
Article no.: 164180 11,5
Article code:
- Tool material: HSS E
- Standard: DIN 208 B
- Helix angle: 7-8
- Through-coolant: no
- Shank: Morse taper
Product details
Technical Data
| Nominal ⌀ DC | 11.5 mm | |
| Coating | uncoated | |
| Tool material | HSS E | |
| Standard | DIN 208 B | |
| Helix angle | 7-8 degrees | |
| Through-coolant | no | |
| Shank | Morse taper | |
| Application for type of drilling | for through hole | |
| ⌀ range | 11.060 mm - 11.800 mm | |
| Flute length Lc | 44 mm | |
| Overhang L1 | 115 mm | |
| Overall length L | 182 mm | |
| Number of cutting edges Z | 6 | |
| Morse taper MT size | 1 | |
| Feed f in steel < 750 N/mm2 | 0.15 mm/rev. | |
| Reaming oversize in diameter | 0.1 mm - 0.2 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 164180 11,5 | |
| EAN / GTIN | 4045197092304 | |
| Manufacturer number | 164180 11,5 |
Application Table
N
20
N
20
P
15
P
10
P
7
P
5
P
4
M
5
M
5
S
5
K
5
N
13
Description
Version:
Reamers finish ground to match your specification.
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Application:
For reaming through holes, as the chips are evacuated in the cutting direction. Also suitable for blind holes due to the short chamfer lead.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Machine reamer configurable 11,5 mm |
||||||
| Coating | uncoated | uncoated | uncoated | TiAlN | uncoated | uncoated |
| Colour ring | without | without | green | green | without | green |
| Overall length L | 182 | 142 | 142 | 142 | 142 | 142 |
| Standard | DIN 208 B | Manufacturer’s standard | DIN 8093 | DIN 8093 | DIN 206 B | Manufacturer’s standard |
| Flute length Lc | 44 | 41 | 41 | 41 | 71 | 41 |
| Tool material | HSS E | HSS E | Solid carbide | Solid carbide | HSS | HSS E |
| Application for type of drilling | for through hole | for through holes | for through holes | for through hole | for through holes | for through holes |