{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Hand reamer Configurable, uncoated, Nominal ⌀ DC: 30mm
Article no.: 160200 30
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Even number of teeth with irregular spacing − teeth are exactly opposite each other; e. g. teeth 1 and 5.
- Tool material: HSS
- Standard: DIN 206 B
- Helix angle: 7-8
- Through-coolant: no
- Application for type of drilling: for through holes
Product details
Technical Data
| Nominal ⌀ DC | 30 mm | |
| Coating | uncoated | |
| Tool material | HSS | |
| Standard | DIN 206 B | |
| Helix angle | 7-8 degrees | |
| Through-coolant | no | |
| Application for type of drilling | for through holes | |
| ⌀ range | 28.201 mm - 30.200 mm | |
| Flute length Lc | 124 mm | |
| Overhang L1 | 155 mm | |
| Overall length L | 247 mm | |
| Number of cutting edges Z | 10 | |
| Shank square □ | 22 mm | |
| Colour ring | without | |
| Configurable tolerances | A; B; C; CD; D; E; EF; F; FG; G; H; I; J; JS; O; L; M; N; O; P; Q; R; S; T; U; V; W; X; ZC; Z; ZA; ZB; ZC | |
| Configurable qualities | 6; 7; 8; 9; 10; 11; 12; 13 | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 160200 30 | |
| EAN / GTIN | 4045197927514 | |
| Manufacturer number | 160200 30 |
Application Table
N
P
P
P
Description
Version:
With left-hand helix 7 − 8° and long taper lead, more than 1/4 of the cutting length. An even number of teeth with irregular spacing for accurately round holes, free of chatter. The cylindrical ground chamfer on the plain cutting section smooths the hole and guides the reamer.
Hand reamers finish ground to match your specifications.
Hand reamers finish ground to match your specifications.
Application:
For through holes (not for blind holes). Also very suitable for interrupted holes.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
|
Hand reamer Configurable, uncoated, Nominal ⌀ DC: 30mm |
||||
| Number of cutting edges Z | 10 | 10 | 10 | 10 |
| Overhang L1 | 155 mm | 181 mm | 181 mm | 150 mm |
| Overall length L | 247 mm | 281 mm | 281 mm | 247 mm |
| Nominal ⌀ DC | 30 mm | 30 mm | 30 mm | 30 mm |
| Standard | DIN 206 B | DIN 208 B | DIN 208 B | DIN 206 B |
| Flute length Lc | 124 mm | 73 mm | 73 mm | 124 mm |
| Helix angle | 7-8 degrees | 7-8 degrees | 7-8 degrees | 7-8 degrees |