{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Copy mill MFH with bore 66/5L mm
Article no.: 222065 66/5L
Article code:
- Milling application: Circular milling; Plunging; Ramping
- Through-coolant: yes
- Machining strategy: HPC
Product details
Technical Data
| Cutting edge ⌀ DC | 66 mm | |
| Number of cutting edges Z | 5 | |
| Shank type | with bore | |
| Milling application | Circular milling; Plunging; Ramping | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| ⌀ D3 | 42 mm | |
| maximum cutting depth ap max | 2 mm | |
| maximum cutting depth ap max for LD geometry | 5 mm | |
| Overall length Ltot | 50 mm | |
| Mounting bore ⌀ | 22 mm | |
| Circular interpolation milling ⌀ Dmin | 108 mm | |
| Circular interpolation milling ⌀ Dmax | 130 mm | |
| Ramping angle αmax | 0,5 degrees | |
| Ramping length L for αmax | 41 mm | |
| Indexable insert size | 14 | |
| suitable indexable insert | SOMT.. | |
| Insert screw | 229719 (20 IP; 4.5 Nm) | |
| Setting angle κ | 10 degrees | |
| Fz Helix | 0,7 | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 222065 66/5L | |
| EAN / GTIN | 4960664719631 | |
| Manufacturer number | THN07663 |
Description
Description:
MFH Harrier high feed rate indexable face mills enable short machining times thanks to high feed rates and high cutting depths. The approach angle in combination with the convex cutting edges reduces the cutting forces and minimises the tendency to vibrate.
Application:
For increased productivity in face milling, pocket milling and slot milling. Because the cutting forces are so low, large overhangs for plunge milling pose no problem.